How do you use a SkyCaddie?

How do you use a SkyCaddie?

Your SkyCaddie TOUCH will charge when it is connected to a computer that is powered on. Simply connect the USB end of the cable to your computer and the micro-USB end to the TOUCH. If your TOUCH is powered on, it will initially display the “Sync” screen and then will indicate that your TOUCH is being charged.

Does SkyCaddie require a membership?

No, the SkyCaddie Watch does not require a membership/subscription. You can choose to get the membership, or not get the membership.

What does a SkyCaddie do?

The SkyCaddie is the easiest and most powerful rangefinder to use on thousands on courses worldwide. Once it acquires GPS satellite signals and you choose the course you want to play it will be the most trusted caddie you have ever had. It will give you all the important information on every shot on every hole.

Is SkyCaddie SX400 waterproof?

The SkyCaddie® SX400 comes in a highly water-resistant, sleek and compact design. With a large battery, the SX400 is ready for extended playing time for that emergency 9, or even 18 more holes.

How do I use SkyCaddie SGX?

Press and hold the center button to turn the SkyCaddie SGX on. To start a round, use the Joystick to select “Play Golf” on the Main Menu. Select a scoring option for this round. The SGX will take a few minutes to get a signal, to determine your location and nearest course.

How do I reset SkyCaddie SGX?

If you have a SkyCaddie Breeze or SGX you can reset these devices by pressing and holding down the power button and pushing in on the joystick (like a doorbell button) at the same time for about 10 seconds. The caddie should power off. Then, power the caddie back on and it should be responding properly.

How do I turn off SkyCaddie SGX?

To power on the SGX, press and hold the button approximately 3 seconds until the display turns on. To power off the SGX, press the button and a confirmation message on the LCD screen will ask you if you want to power off the device; select “Off” to turn it off or “No” to cancel.

How do I update my SkyCaddie touch?

How to get this new feature:

1. Go to www.skygolf.com.
2. Connect your Touch Via USB to computer and click SYNC.
3. Follow onscreen instructions to update to Version 1.02.001.

How do I update my SkyCaddie SX500?

Go to www.SkyGolf.com and click on “Register New Product” on the top menu bar 3. Turn on the SX500 and click SYNC and then USB SYNC. 4. Follow the onscreen instructions to complete the registration process.

How do I sync SkyCaddie?

Please follow the steps below to sync your SkyCaddie:

1. Ensure your SkyCaddie is turn on and connected to the computer using the USB cable provided by SkyGolf. Your SkyCaddie should be in Sync mode.
2. Reconnect the USB cable into a different USB port on your computer.
3. Uninstall and reinstall CaddieSync Express.

How do I sync SkyCaddie SG5?

Sync your SkyCaddie SG5

1. Power on the SkyCaddie. Please turn on your SkyCaddie by pressing the Center Soft Key.
2. Connect the Cable. Please make sure that the cable provided with your SkyCaddie is plugged into the corresponding port on the bottom edge of the SkyCaddie.
3. Plug into the Computer.
4. Sync your SkyCaddie.

How do I renew my SkyCaddie?

How do I renew my membership?

1. Turn on your SkyCaddie and connect it to your computer.
2. Launch CaddieSync.
3. Click the ACCOUNT tab in the upper navigation bar.
4. Login with your username and password.
5. On the Account Overview page, click link the Renew link under Actions at the lower right of the CaddieSync window.

How do I change the battery in my SkyCaddie watch?

To Install the Battery:

1. Plug the new battery into the connector at the bottom of the circuit board.
2. Set the battery back into the battery compartment and tuck the wires along the.
3. Align and connect the two halves.
4. Gently press the two halves of the SkyCaddie together and replace the screws.

How do I update my SkyCaddie?

Please do the following:

1. Go to www.skygolf.com.
2. Connect your SkyCaddie to your computer.
3. Click SYNC in the upper right hand corner.
4. CaddieSync Express will launch, please follow the update prompts.
5. When the update process is finished you are ready for play.