What size nut is on a CV axle?
36mm
What is the torque for wheel bearings?
Generally, jam nuts less than 2-5/8″ should be torqued to 200-300 lbf-ft; nuts 2-5/8″ and over should be torqued to 250-400 lbf-ft. See chart for exact torque specification.
How tight should wheel bearings be?
Do Check For the Recommended Torque Procedure of torque while rotating the wheel to make sure the bearings are seated. The adjustment nut is then loosened 1/6 to 1/4 turn, and locked in place with a new cotter pin. As a rule, endplay should be about 0.001 to 0.005 inches.
What is the torque spec for aluminum wheels?
70 ft. lbs
How many foot pounds do you torque lug nuts?
Most automotive lug nuts are tightened to 90 – 120 ft. lbs., trucks will be more, about 120-150 ft. lbs.
What is 1 Nm of torque?
One newton-metre is equal to the torque resulting from a force of one newton applied perpendicularly to the end of a moment arm that is one metre long. The nonstandard notation Nm occurs in some fields.
What is the formula for calculating frictional torque?
The frictional torque, therefore, is calculated as the difference between the applied torque and the resulting net, or observed, torque. Determine the net torque of a frictionless mass pulley system with a pulley of a given radius, R, a given pulley mass, m1, and mass suspended from the system, m2.
At what angle is torque minimum?
Explanation: The torque of a conductor loop is given by T = BIA cos θ. The torque is minimum refers to zero torque. This is possible only when the angle is 90 or perpendicular.
In which condition Torque is maximum?
(b) The maximum torque occurs when θ is a right angle and sin θ = 1. (c) Zero (minimum) torque occurs when θ is zero and sin θ = 0. (d) The torque reverses once the loop rotates past θ = 0. τ=wIlBsinθ τ = w I l B sin .
What is the minimum torque?
Torque will be minimum, when Φ = 0° or 180° ,sin Φ =sin 0° or sin 180° =0 i.e when the force is applied parallel to the direction of. .
How do you know if net torque is zero?
If the size and direction of the torques acting on an object are exactly balanced, then there is no net torque acting on the object and the object is said to be in equilibrium.
What happens when net torque not zero?
If the net torque is not zero, there will be angular acceleration. It implies the angular velocity will be continuously changing. Conversely, if angular velocity is not changing, that is , if angular velocity is constant, angular acceleration is zero and there is no torque.
At what condition torque is zero?
Under what condition torque acting on body by a given force is zero? That is, Torque = 0. That is, when line of action of forces passes through the axis of rotation, torque is zero.