How do you activate sticky bombs in GTA 4?
Sticky bombs are purchasable from Ammu-Nation after they have been unlocked. They will stick to any surface they are thrown on. To use, throw the bomb to stick it on a surface, walk away (or you will take damage/die) and detonate using the left arrow.
How do you detonate bombs in GTA 4 PC?
Take the sticky bomb and either place or throw it on the target. Then, press “G” on the keyboard to detonate. This is the default button for detonating bombs in the PC unless the configuration has been changed.
Can you tune a stock turbo car?
Tune your turbo vehicle via an ECU reflash if your turbocharger’s boost pressure is electronically controlled. Most aftermarket companies offer a reflash for stock vehicles, thus making it the only modification needed to tune your turbo.
Do you need to tune a turbo car?
Unfortunately yes. Car will run fine under normal condition with no tune , but pressing more than half throttle will be lean and not safe. Also, adding the turbocharger is a nice addition to the performance, but lets say that tuning the car with that turbo is what will give you most of your performance gain!
Can you turbo a car with a stock ECU?
Yes, you can do this, although it depends heavily on the ECU, and you can’t run much pressure. I would estimate that you’re not going to get more than 5 psi of boost before you have some serious issues. In general, the reason this is possible is that stock engines have to run at a wide range of conditions already.
Do you need an ECU to run a turbo?
On most you will absolutely need an ecu, you should get one either way. Highly unlikely. N/A cars run much leaner than turbo cars. You will almost certainly get detonation and destroy your engine.
How much boost can a stock ECU handle?
You can run exactly 0.0 pounds. You can run ~ 11 psi on the stock map sensor once your ecu is chipped.
Can I tune a stock ECU?
Modified Stock ECU Using a real time programmer in place of the eeprom chip on the ECU board, a custom tune can be performed. A modified stock ECU allows for direct control over all functions of the factory ECU, so excellent performance, fuel economy, and overall running can be achieved.
How much does it cost to tune a stock ECU?
the only prog i know of using the stock ecu to tune is opensource or ecutek. typical cost of opensource ranges from $400 to $1200, depending on who’s the tuner. as for ecutek, shd be in the region of $1k+.
How much HP does tuning add?
If you have installed a lot of performance parts like cold air intake, exhaust and turbo – then tuning your car will definitely gain you a lot of horsepower. To give a ballpark figure – if you are on a stock car, you could probably gain 10-15 horsepower from a dyno tune.
How much does an ECU tune cost?
Dyno & Tuning Pricing
| Stand Alone ECU Tuning | SET-UP FROM SCRATCH | Tuning (basemap installed) |
|---|---|---|
| Full setup of system, including dyno tuning, street tuning, startup maps, etc. | $800 to $1200 (typical cost) | $600 to $1000 (typical cost) |
Is a dyno tune worth it?
A dyno tune commonly provides for maximum power, better drivability, good fuel economy and a smoother ride. Dyno tuning can also save you from costly repairs in the future. A dyno tuned engine does not have to work as hard as a vehicle that has not been dyno tuned.
How much should a dyno tune cost?
Q: How much will dyno runs / tuning sessions cost at VAC?
| 3 Power Pulls: w/ Wideband O2, with print out | $75 (Mustang Dyno) |
|---|---|
| Hourly Dyno Tuning service: | $105-$145 per hour* |
| *Price depends on ECU tuning system* | |
| Self Tuning / Rent Dyno | (Not available at this time) |
| Most OBD1 custom tuning starting at: | $599 |