What is the meaning of diagonal pliers?
Diagonal pliers (or wire cutters or diagonal cutting pliers or diagonal cutters) are pliers intended for the cutting of wire (they are generally not used to grab or turn anything). The plane defined by the cutting edges of the jaws intersects the joint rivet at an angle or “on a diagonal”, hence the name.
What are diagonal cutter used for?
Diagonal cutting pliers are used for cutting wire and small pins in areas that cannot be reached by larger cutting tools. Because the cutting edges are diagonally offset about 15 degrees, these can cut objects flush with a surface.
Why are pliers called dikes?
Dikes (another name for general-purpose wire cutters), most likely derives its nickname from a blend of the term “diagonal cutters.” Also known as “side cutters” and “diags,” these handy pliers have been an electrician’s best friend and led to an even more provocative idiom: “When in doubt, dike it out.”
What is mechanical plier?
Pliers are a hand tool used to hold objects firmly, possibly developed from tongs used to handle hot metal in Bronze Age Europe. This arrangement creates a mechanical advantage, allowing the force of the hand’s grip to be amplified and focused on an object with precision.
Which tool is best suited for cutting cotter pins?
Wire cutters, dykes. side cutters, just grab the cotter pin using the nut to leverage on and pull it up little by little. For future times, You don’t need to pretzel a cotter pin all around to secure it. Just pull one end up at an angle so the pin can’t back out of the hole.
Can you use pliers to cut wire?
Do not use pliers as a hammer. Do not hammer on pliers or wire cutters to cut wires or bolts. Do not extend the length of handles to gain greater leverage. Use a larger pair of pliers for gripping or a bolt cutter for cutting.
How do you maintain needle nose plier?
Rinse with freshwater after each use, especially after use in saltwater. Occasionally, treat your pliers with an anti-rust spray, such as WD40 or Boeshield T9. Wipe with cloth and air dry.
Are long nose and needle-nose pliers the same?
Long nose pliers – also known as needle-nose pliers, these are similar in functionality to linesman pliers, with the added bonus of allowing the user to reach into tight spots due to the long, tapered jaws. Water pump pliers are used to hold objects of various sizes, and bend wires.
What are needle-nose pliers used for?
Needle-nose pliers are used to manipulate wire using the textured teeth. When working with this tool, the handles should be gripped tightly yet apply gentle force. They are not sturdy enough to cut large, hardened wires, and they are not to be used on live electrical wires.
What can I use instead of a wire cutter?
It’s possible to use a hacksaw to cut wire if no cutter is available. You’ll want to use a blade with a high teeth-per-inch (TPI) count for as clean a cut as possible. Regardless of the TPI count, using a hacksaw to cut wire is difficult unless the wire has a large diameter.
What can you use to cut wire?
Choosing a Cutting Tool. Use Lineman’s pliers to splice or cut electrical wires. Lineman’s pliers have their cutting device on the side, and they are used for many different construction and electrical jobs. If you need to grip, strip, or cut any sort of electrical wire, this is the safest choice.