What weight oil do I use in my Harley transmission?
The optimum product would be Mobil 1 Racing™ 4T 10W-40 motorcycle oil, but it is also okay to use Mobil 1™ V-Twin 20W-50.
What kind of transmission fluid does a Harley Davidson take?
AMSOIL Offers Superior Protection And Performance
| AMSOIL Recommendations for Harley-Davidson Motorcycles | ||
|---|---|---|
| Flathead | Best | Secondary |
| Transmission | 20W-50 | MVT Synthetic V-Twin Transmission Fluid |
| Primary Chain Case | 20W-50 | MVP Synthetic V-Twin Primary Fluid |
| Ironhead – Evolution Sportsters / V-Rods | Best | Secondary |
Can I use 20W50 in Harley transmission?
Which choice is better for Harley-Davidson transmissions? A particularly nice feature about AMSOIL 20W-50 Synthetic Motorcycle Oil is that it can be used in the engine, transmission and primary chaincase of Harley-Davidson motorcycles.
What is the best oil to use in a Harley Davidson?
List of Top-Rated Oils for Harley Davidson Motorcycles Comparison Table:
| Product Name | Type | Qty. |
|---|---|---|
| Mobil 1 96936 20W-50 V-Twin Synthetic Motocycle Motor Oil – 1 Quart (Pack of 6) | 20W50 | 6 x 1 qt. |
| Motul 104092 Synthetic Engine Oil | 20W50 | 4 Liters |
| YamaLube All Purpose 4 Four Stroke Oil 10w-40 1 Gallon | 10W40 | 1 Gallon |
What happens if I put too much oil in my Harley?
Adding too much oil to a motorcycle will increase the pressure in the crankcase which in turn forces oil out of the engine and into your intake system. This can cause damage to the engine as well as burn oil in the engine where oil is not supposed to be present. Too much oil or too little oil will damage components.
Do you check Harley oil on kickstand?
The transmission oil is checked with the motorcycle on a level surface and on the kickstand. The transmission oil level is correct when between the Add and Full marks on the dipstick.
Do you check motorcycle oil on kickstand?
You can’t get a good reading if your bike’s on its kickstand, so grab a buddy to hold it up for you, invest in a stand or apply the brakes while gently balancing it on its wheels. This isn’t a job for a hot bike. Your dipstick and sight glass are designed for cool oil, which doesn’t have the same viscosity as hot oil.
Do you check Harley oil hot or cold?
Oil quantity is only 3- 3.5 qts or so it wont expand a lot there is a range on the stick so hot /cold whatever if it is hot just let it sit a few minutes after shutting the engine off before checking the level. Keep it in the range listed on your stick.
How do you check transmission fluid on a Harley?
Straddle your Harley and hold it level, off the side stand, for 20 to 30 seconds. Remove the transmission dipstick and wipe it clean before reinserting it into the block. Do not screw it in. Insert the dipstick until the top of the threads is resting on top of the hole to check the transmission fluid in a Harley.
How do you check the fork oil on a Harley Davidson?
Push the fork oil level gauge handle all the way into the gauge. Set the metal ring on top of the fork and insert the gauge tube into the fork. Pull the fork oil level gauge all the way up to suck out any excess oil in the fork tube. Expel the excess oil into a drain pan and repeat the process for the other fork tube.
How much is Harley Davidson oil?
Service Pricing Menu
| SCHEDULE MAINTENANCE | PRICE* |
|---|---|
| 1K SERVICE | |
| Street [black oil filter only] | $329.95 |
| Sportster | $319.95 |
| Softail | $399.95 |
Should I run synthetic oil in my Harley?
Harley Davidson suggests that you should always use 20W-50 full-synthetic oil for the Twin Cam engine. If you dig deep, you will see different values such as 5W-40, 10W-40, 15W-50, 20W-50, etc. labeled by the lubricant manufacturers.