What colors are the speaker wires?
The right-front speaker wires are gray, left-front speakers are white, right-rear speakers are purple, and left-rear speakers are green. Ground wires are black, antenna wires are blue, and amplifier wires are blue with a white stripe.
Does it matter which way speaker wires go?
If both speakers are wired the same, whether in the correct polarity or reversed polarity, there will be virtually no effect. Any changes in polarity are almost always made in an audio console or amplifier DSP, rather than in the wiring of speaker terminals.
How do you wire left and right speakers?
Look for “L” and “R” to indicate the left and right speakers. Be certain you are wiring the speaker on the right side of your rig to the socket labeled “R” on the back of your amplifier. Same goes for left and “L”. Take advantage of the color coding on the sockets when connecting wires.
Why does my speaker have 3 wires?
3 Answers. The size difference and rough casing on the center wire indicate that it’s probably shielded cable. This takes the form of a braided wrap on the two speaker wires, and prevents the speaker from receiving interference, for instance from 60Hz mains wiring or transformers in the iPod player device.
Can you run two speakers one wire?
When using more than one speaker with your amp the equivalent overall impedance changes depending on how the speakers are wired. You can wire multiple speakers “in series,” “in parallel” or in a combination of the two wiring configurations (“series/parallel”).
Can you plug an 8 ohm amp into a 16 ohm speaker?
How can you use 16 Ohm speakers with an 8 Ohm amplifier? You can just connect them, the same way you would if they matched. The only difference is they would not provide the full power the amplifier was designed for, by about 3db.
Can you plug a 4 ohm amp into an 8 ohm speaker?
Can you use a 4 ohm amplifier with 8 ohm speakers? Yes you can, provided it’s not a tube amplifier with a transformer output. Solid state amplifiers will be perfectly fine, though they will only deliver half the rated power to an 8 ohm speaker.
Can you mix speakers with different ohms?
While you can connect a mix of speakers with different ohm ratings, the best sound quality will come from equally rated speakers connected in pairs, such as two 8-ohm speakers connected to Speaker A on the amp or receiver and two 4-ohm speakers hooked up to Speaker B.
Are higher ohms better for speakers?
All speakers have an impedance rating in ohms, which represents how difficult the speaker is to power. The lower the impedance, the more efficiently it allows the electric signal, which is basically the music, to pass through the speaker.