How do I program my FIOS remote to my soundbar?

How do I program my FIOS remote to my soundbar?

1. On the remote control press & hold the OK & * buttons, release together. (The LED will blink twice, then stay lit.)
2. Press and hold the key that does not work correctly.
3. Once the (sound bar) responds correctly, release the button.
4. Press the OK button to save the setting.

How do I control my Sony Soundbar with my remote?

Syncing Sony Sound Bar With TV Remote

1. Make sure sound bar and TV are connected using HDMI cable.
2. Enable “Control for HDMI” on both your TV and sound bar.
3. Finally, press “Sync Menu” on the TV remote, go to HDMI Device selection, select your sound bar and you are ready to go.

Are Sony Soundbar remotes universal?

A SONY soundbar can be controlled with any universal remote if you have the correct programming guide and the correct remote codes for the sound bar.

Can I control my Sony Soundbar with my phone?

Sony’s newest version of App Remote lets you take control of the equalizer, fader, balance, subwoofer, and listening position controls from your smartphone too..

How do I program my Sony soundbar to my universal remote?

Step 1: Switch on your SONY SOUND BAR set. Step 2: Hold your universal remote to face your SONY SOUNDBAR you wish to program. Step 3: Find the ‘Menu’ option on your universal remote. Press on to the ‘Settings’ button and ‘Program Remote’ then choose ‘SOUND’ or any device you wish to program.

How do I connect my universal remote to my sound bar?

Point your universal remote at the soundbar you want to pair to. Press the Setup button on your universal remote until the light on the remote flashes (this step will vary depending on the brand), or press the AUX and OK buttons simultaneously, then press the channel up button.

How do I program my Sony sound bar?

1. Connect one end of the HDMI cable (sold separately) to the HDMI IN port on your TV.
2. Connect the other end to the TV OUT (ARC) port on your sound bar.
3. Then, connect an optical audio cable from the TV’s Optical digital audio out to OPTICAL IN on your sound bar (this is necessary to hear the TV audio).

How do you pair a soundbar to a monster?

Power on the external Bluetooth enable device and enter Bluetooth mode and try searching the unit. 4. When ” MONSTER SB1 ” appears, select it and make connection.

How do I get my soundbar to work?

How to fix surround speakers

1. Make sure the soundbar is set to surround-sound mode, with the surround speakers on.
2. Make sure you’re listening to surround-encoded content that your soundbar supports.
3. Make sure your source devices and TV are set to output a bitstream audio signal.

How do you hook up AV cables to surround sound?

Connect a Coaxial Digital Cable, Optical Digital Cable, or Audio cable to the Audio Output jack on your TV. Connect the other end of the cable to the corresponding jacks on the A/V receiver or home theater system. Depending on your device, the audio input may be labeled TV INPUT or VIDEO INPUT.

How do I hook my TV up to my surround sound?

1. Connect an HDMI cable to the HDMI ports labeled ARC, or the port identified in your manual that supports ARC.
2. Set Speakers to Audio system. The steps below are an example on Android TV™.
3. Turn on the Control for HDMI setting on both the TV and the receiver or home theater system.

How do I connect my 5.1 speakers to my Sony TV?

Connect and disconnect an HDMI cable from the BRAVIA TV and Sound Bar/AV receiver. Check that the ports with the ARC label are connected to each other with an HDMI cable. The HDMI ports are labeled ARC on both the BRAVIA TV and Home Theater system/AV receiver.