Can I use computer speakers on my stereo?

Can I use computer speakers on my stereo?

To accomplish this, you need to connect the audio input of your computer to the audio output of your stereo receiver. We recommend a 3.5mm mini phone plug to Rca jack adapter with a RCA jack stereo cable which plugs into the “line” or “mic” input of your computer’s sound card.

How do you connect computer speakers to computer?

Use the following steps to connect a pair of front desktop speakers to the computer:

1. Position one speaker on each side of the computer monitor.
2. Connect the audio cable to the green Speaker Out port on the back of the computer.
3. Plug the speaker AC adapter into the electrical outlet and turn on the speakers.

What can you do with computer speakers?

Another use for computer speakers is amplified speakers for an MP3 player. Just plug the speakers into your MP3 player and you’re ready to listen to music without headphones. My cell phone has a 3.5 mm audio jack. When it’s plugged into speakers it can be used as a speaker phone or listen to a podcast.

Can computer speakers be used on a phone?

As long as your pc speakers have the right kind of plug/jack as your phones headphones jack, then yes you should be able to. However, in using the speakers, it is possible that your phone will not allow you to talk to someone while using the speakers.

Can you connect speakers to phone?

Android: Go to Settings > Connected devices > Bluetooth. Select Pair new device and then tap the speaker’s name.

Which device runs your computer speakers?

Sometimes referred to as earphones, headphones are a hardware output device that either plug into a computer line out or speakers. Headphones allow you to listen to audio or watch a movie without disturbing people around you.

How do I connect external speakers to my CPU?

Step 1: Ensure that the computer is turned off. Step 2: Plug the speakers into the power socket. Step 3: Locate the 3.5mm jack connected to the cable at the back of the speakers. You’ll use this plug to attach them to your computer tower.

Are speakers analog or digital?

Are speakers analog or digital devices? Though speakers are regularly connected to digital audio devices, they are inherently analog transducers. Speaker transducers convert analog audio signals (electrical energy) into sound waves (mechanical wave energy).

Do computer speakers have amplifiers?

Most such speakers have an internal amplifier and consequently require a power source, which may be by a mains power supply often via an AC adapter, batteries, or a USB port. Most computers have speakers of low power and quality built in; when external speakers are connected they disable the built-in speakers.

How can I make a speaker without an amplifier?

How to Power Passive Speakers without an Amp

1. Position your equipment – speakers, PC, jack.
2. Make sure the computer is turned off.
3. Plug the speakers into the power socket.
4. Find the 3.5mm RCA jack at the back of the computer tower.
5. Plug the jack into the audio source to get a good connection.
6. Turn on your computer.

Do you need a amplifier for speakers?

Powered speakers do not need an amplifier. They have an amplifier already installed in them which is why they are called ‘powered speakers’ to begin with. Depending on the speakers’ input options, you can hook them up to different audio sources without the need for a separate amplifier.

How do you hook up old school speakers?

Plug in the audio cable into the CD player’s audio output (top picture) and then plug the other end into the stereo receiver’s CD audio input (bottom picture). 4. Run your speaker wire from the receiver to your speakers. Look for the speaker terminals (red and black) and stick the wire in there.