What size is a Subaru axle nut?

What size is a Subaru axle nut?

The axle nut size for a Subaru Legacy iS32mm with a thread size of m22-1.50.

What size is the front axle nut?

36mm is a very common hex size for replacement axle nuts.

What happens if axle nut is loose?

The stub axle nut puts preload on the inner and outer bearings inner race and the spacer in between the two bearings. If that is loose, the bearings may walk in and out of the bearing housing in the trailing arm and stub axle as well. Trailing arm and stub axles may get damaged.

How tight should my axle nut be?

The nut on the spindle should be tightened until snug, with no side-to-side play in the hub and then backed off slightly, about maybe a 1/8 of a turn.

Can I drive without a CV axle nut?

Yes you can drive your truck with out cv joints. But you do need part of the cv joint . If that makes any sence. If you break a cv joint pull it apart and remove the joint of the cv closes to the wheel.Be sure to remove the other parts of the cv joint not used.

What are the signs of a bad axle?

4 Signs of a Bad CV Axle/Half Shaft

1. “Clicking” Noises When Turning.
2. A Knocking Sound.
3. Grease on the Inside or Edge of the Tires.
4. Vibration While Driving. This is a tricky one, since there are many things that could cause vibration when you drive.

Can I drive on a bad axle?

If your axles are failing, you’ll still technically be able to drive your car. This is very risky, though, as they could completely fail at any point. When your axle fails, it’s possible that you’ll lose control of the car, possibly causing an accident or crashing.

How do you know if your axle shaft is bent?

Shaft/axle wobble and vibration – When your vehicle has a bent or broken axle shaft, one of the clearest ways you’ll notice is how at lower speeds the car might seem to wobble. At higher speeds (over 20 mph), the wobble may turn into what feels more like a general vibration.

How much does it cost to fix a bent axle?

How much does it cost to fix bent axle? The cost to repair an axle runs between about $500 and $600 dollars before taxes and fees. Costs vary depending the type of vehicle, brand, make, and model. Labor costs vary from between about $50 dollars and $140 depending on how long the job takes for a model of vehicle.