Can I use T12 in T8 fixture?
As far as safety is concerned, you can exchange them. If you place T12 tubes in a fixture with a T8 ballast, you will wear out the ballast and have to replace it. If you place T8 tubes in a fixture with a T12 ballast, then the tubes will have a shorter life due to a higher current through the tube.
What does T8 or T12 mean?
Fluorescent lamps, or fluorescent linear tubes as they are also known, are categorized according to their wattage, shape and diameter. The other common lamps are the larger T8 (eight eighths inch = 1″) and T12 (twelve eights inch = 1½” tubes).
What is T5 and T8 light?
T5 lamps have a diameter equal to 5 times an eighth of an inch, or 5/8″. These lamps are approximately 40% smaller than T8 lamps, which are one inch in diameter, and almost 60% smaller than T12 lamps, which are 1½” in diameter.
What is difference between T5 and T8 tube light?
The major physical difference between T5 and T8 light bulbs is the length and diameter of the tube itself. The T5 tends to be slightly shorter than the T8 tube, and is significantly smaller in diameter. This factor is important to consider when looking at your fixture, because the two tubes are not interchangeable.
Which is brighter T8 or LED?
LED provides 70% more light. The beam angle of the LED replacement bulb is 110 degrees. This means that all of the light generated by the LED bulb is focused in the 110 degree area. The T8 bulb, on the other hand, has a beam angle of 360 degrees.
Is T5 better than LED?
LEDs also offer increased light efficiency when dimmed as opposed to T5 fixtures and usually produce more lumens per watt in general, which decreases energy usage and thus, energy costs. A lower wattage of LED luminaire will usually be just as efficient, sometimes more, as a higher wattage T5 lamp.
Are T5 bulbs being discontinued?
Lamps affected include fluorescent 4 foot T8, T5, T5HO and 2 foot U-bent lamps. However, many 32W lamps have either been re-engineered or discontinued by the manufactures. Most current fluorescent T5 linear lamps already comply with the new standards. Even some T8 lamps have been phased out.
Can you replace T5 with LED?
T5 LED Tube Lights and LED Fluorescent Tube Replacements. Reduce the time and money spent relamping your T5 fluorescent fixtures in your home or business by upgrading to LED with these LED T5 tube lights from 1000Bulbs.com!
Can I replace T5 fluorescent with LED?
Plug and Play, or direct wire, LED T5 lamps make switching from fluorescent to LED simple. These bulbs are easy and quick to install. Replacing the ballast in your current fixture won’t be necessary, as it plugs directly into the fixture without any rewiring.
What’s better for plants fluorescent or LED?
When it comes to energy efficiency, LED grow lights beat out the best fluorescent grow lights, hands down. When comparing lighting efficiency, it’s important to look at the light levels delivered to plants rather than just the electrical watts.
Are T5 lights better than led for reef tank?
T5 reef lighting makes it easier to get results and are often much cheaper. It is not that T5s are inherently better than LEDs. In fact, it is possible to achieve even better results with LEDs but is it worth the necessary effort and expense? The answer to that is based on your personal experience and budget.
Do T5 lights use a lot of electricity?
Energy. A four-lamp bay using high output T5 lamps uses 220 watts of power including the power used for the ballast; a six-lamp T5 bay uses approximately 342 watts of electricity. Four-lamp T5 bays use about 6,840 kilowatts (kW) of electricity per hour, with six lamp bays consuming about 10,260 kW per hour.
How many watts is a T5 grow light?
T5 lamps are available for standard output and high output. The wattages for standard T5 lamps are 14, 21, 28, and 35 watts. The high-output T5 (T5 HO) lamps are available in 24, 39, 54, and 80 watts (49-watt T5 HO lamps are also available from GE Lighting).
How many amps does a T5 grow light use?
3 amps
Will T5 lights grow plants?
T5 grow lights are one of the best types of lights you can use to grow any kind of plant, from vegetables to the most delicate flowers. This is because T5s are extremely efficient, allowing you to save money on electricity while still providing bright, powerful light.
Are T5 lights good for vegging?
With the new high output lights such as the T5, fluorescent lights can be used until the plants are about 24 inches tall, which is just enough to grow a very short plant through to the flowering stage when you control your marijuana plant’s growth through the vegetative stage.
How close should my T5 be to my plants?
T5 Grow Light: Distance From Plants To begin with, hang it about 4 to 6 inches above the tallest plant, for vegging or flowering. The T5 fluorescent grow light distance for seedlings should be a bit further away. I’d start by hanging the light 6 to 10 inches from seedlings.
What’s the best light for flowering?
Color temperatures of 2700K and 3000K are ideal for flowering. 3500K works well, too. That said, you can flower with cooler lights. In fact, if you are using the light for every stage, you may want a light that is around 3500K to 4000K.
What lights do professional growers use?
Today, the most widely used lights for professional use are HIDs and fluorescents. Indoor flower and vegetable growers typically use high-pressure sodium (HPS/SON) and metal halide (MH) HID lights, but fluorescents and LEDs are replacing metal halides due to their efficiency and economy.
Should I use both veg and bloom switches for flowering?
Use the veg switch during the veg phase. When it comes time to flower turn on your bloom switch and leave your veg switch on as well. If you’re growing autos you can run both switches from beginning to end from what I’ve heard. Veg switch only on for veg and both switches on for flowering.