Do log splitters use hydraulic fluid?
Unless you use a kinetic powered log splitter, your machine is run off a hydraulic system to provide unparalleled wood splitting power. In short, you should always use the recommended hydraulic fluid provided by the log splitter manufacturer. …
Is hydraulic fluid the same as hydraulic oil?
Hydraulic oil is a non-compressible fluid that is used to transfer power within hydraulic machinery and equipment. Otherwise known as hydraulic fluid, hydraulic oil can be synthetic- or mineral-based.
When should you change hydraulic fluid in a log splitter?
Whether it’s gas or electric log splitter, it is recommended to change the hydraulic fluid every 100 hours of work (be sure to check they manual of your exact machine). In addition, just like your car, you need to change the log splitter hydraulic oil filter also.
Where do you put hydraulic fluid in a wood splitter?
To add the appropriate amount of hydraulic fluid, you must first remove the oil filling plug. Then fill the hydraulic fluid unit until it is three-fourths full. After you have added the right amount of hydraulic fluid, you’ll need to remove, or bleed, the trapped air from the cylinder.
What kind of hydraulic fluid should I use in my log splitter?
The approved fluids that our log splitter hydraulic systems may be filled with are: Dexron III Automatic Transmission Fluid. 10W AW Hydraulic Oil. Pro Mix AW-32 Hydraulic Fluid.
What kind of hydraulic fluid do you use in a wood splitter?
The most common approved hydraulic oil for log splitters is a hydraulic oil that is AW (Anti Wear) 32. This type of oil lubricates gears and other mechanical parts during extreme heat and cold. Additionally, it pressurizes the hydraulic system.
How do you know if your hydraulic fluid is low?
How do you know if you are low on fluid? The first sign will be a gurgling sound resonating from the power unit. This gurgling will occur as the platen is moving from completely closed to open. Another sign will be sluggish response from the cylinders when the platen begins to move from the completely open position.
What is the shelf life of hydraulic fluid?
Although the life of a hydraulic oil really depends on many variables, including quality of oil, operating conditions, and potential contamination, a good quality hydraulic oil should last at least 6 months if conditions are not severe.