How can I tell if I have a 302 or 351?

How can I tell if I have a 302 or 351?

The 351 blocks were as much as 1.300 in. taller to allow for a longer Stroke . You can spot the difference pretty easily by looking at the front of the engine. On a 302 (or smaller c.i.d.) blocks, the distributor mount is almost flush with the top of the block (where the intake sits).

How do you tell a 351W from a 351M?

Three Easy Visual Differences Between the 351C and 351M Due to a higher deck, the 351M’s intake manifold is wider than a 351C. Motor Mounts. 351 Cleveland mounts use two bolts to attach to the engine, whereas the Modified uses three.

How do I know if I have a 351M?

The 351M and almost all 400’s have the large bell housing pattern like the 429/460. The only 100% positive way to tell if you have a 351M or 400 is to drop the oil pan and check the casting numbers on the crank. They should be on the side of the first counterweight. A 400 crank will have 5M, 5MA or 5MAB casting code.

How do you tell the difference between a 289 and 302?

The only difference between the 289 and 302 is the 302 has a 1/8″ longer stroke.

How much horsepower does a 289 Ford Motor have?

The 289 (1963-1968) was a high-revving, pint-sized powerhouse producing 195 and 210 horsepower in base trim (two or four barrel carburetor, respectively), and 271 horsepower in HiPo (High Performance) form.

How much HP can a 289 make?

500 hp is the “generally accepted” limit on any 289-302 block. The main webs can’t handle that much power for long.

What is the most horsepower you can get out of a 289?

You can easily get the 289 to 400 hp, at the crank, without any extreme measures.

Can you put 351 heads on 302?

351 cleveland heads will not work on a 302 block without a special clevor intake manifold which is no longer being produced.

Will 351 Cleveland heads fit a 351 Windsor?

Member. 351C heads will not work on a 351W block without drilling new water jackets in the heads. A 351C intake will not work at all on a 351 W.