How do I change a slave cylinder?
How to Replace the Clutch Slave Cylinder
- Raise and support the front of the vehicle on jack stands.
- Remove the slave cylinder by removing the two bolts, one on either end of the slave cylinder.
- Install the new slave cylinder.
- Fill the clutch master cylinder with brake fluid.
Where is slave cylinder located?
Locate the slave cylinder. It is located on top of the transmission, is approximately four to six inches long. Trace the copper fluid line coming from the master cylinder to the slave. If you can’t see it from the hood, try locating it from under the vehicle.
How do I know if my slave cylinder is bad?
Symptoms of a Bad Clutch Slave Cylinder
- Inability to switch gears.
- Low fluid level.
- Leaking of brake fluid.
- Clutch pedal goes all the way to the floor before working.
- Clutch pedal feels loose.
- Contaminated brake fluid.
What does a bad slave cylinder cause?
If the clutch slave cylinder develops any sort of leak internally or externally it may cause the pedal to feel spongy or mushy. The pedal may also sink all the way to the floor and stay there when depressed, and may not be able to properly disengage the clutch so the transmission can be safely shifted.
What is the difference between master cylinder and slave cylinder?
Clutch Master Cylinder is connected directly to the clutch pedal and is part of the hydraulic system that generates hydraulic pressure. Clutch Slave Cylinder is used in the hydraulic clutch system and is usually mounted in the transmission, it can be found either on the outside or on the inside.
When should I replace my slave cylinder?
Signs that your clutch slave cylinder need to be replaced include: You are not able to change gears when you are driving. Brake fluid is leaking around the clutch pedal. When you press the clutch pedal, it goes all the way to the floor.
How much does it cost to replace a slave cylinder on a Ford Focus?
Ford Focus Clutch Master Cylinder & Slave Cylinder Replacement costs $239 on average.
| Car | Service | Estimate |
|---|---|---|
| 2010 Ford FocusL4-2.0L | Service typeClutch Master Cylinder & Slave Cylinder Replacement | Estimate$328.29 |
| 2003 Ford FocusL4-2.3L | Service typeClutch Master Cylinder & Slave Cylinder Replacement | Estimate$346.28 |
How master and slave cylinders work?
What are the Master and Slave Cylinders? The master cylinder is basically a piston that pushes brake fluid into the slave cylinder (the caliper). This forces the brake pad to press against the brake disc, stopping the vehicle. The size of the cylinders should be appropriate for the size of the motorbike and purpose.
How much does it cost to replace a clutch in a 2014 Ford Focus?
The 2014 Ford Focus clutch replacement cost or 2012 Ford Focus clutch replacement cost is $800 to $950, and the Ford Mustang clutch replacement cost is $900 to $1,200.
How long does it take to replace the master cylinder?
Replacing a master cylinder is not necessarily the most complicated job in the world. But it is one that’s going to take at least a couple of hours for a mechanic to finish in most cases. It could also take additional time if you’re going to be replacing other aspects of your brake system.