How do I change top view in AutoCAD?

How do I change top view in AutoCAD?

How do I change the view in AutoCAD 3d?

1. Click View tab Views panel View Manager. Find. The View tab is not displayed by default, so an alternative method is to enter VIEW at the Command prompt.
2. Select a preset view (Top, Bottom, Left, and so on).

How do I create a side view in AutoCAD?

To Create a Side View for a Shaft (AutoCAD Mechanical Toolset)

1. In the Shaft Generator dialog box, select the Side View option.
2. In the Side View dialog box specify, whether the side view is to be generated from the left or the right of the shaft.
3. Specify the insertion point.

When an object is observed from top the orthographic view is called as?

A plan is a view of a 3-dimensional object seen from vertically above (or sometimes below). It may be drawn in the position of a horizontal plane passing through, above, or below the object. The outline of a shape in this view is sometimes called its planform, for example with aircraft wings.

What are the 3 planes of projection?

[FIGURE 3-2] Projections of the point are made onto three of the surfaces that make up the box: the top or “H” (horizontal) plane, the front or “F” (frontal) plane, and the right side or “P” (profile) plane.

Where do you put hidden lines?

Hidden lines are used to show surfaces that are not directly visible. All surfaces must be shown in all views. If an edge or surface is blocked from view by another feature, it is drawn using a hidden line. Figures 4-11 and 4-12 show objects that require hidden lines in their orthographic views.

Do isometric drawings show hidden lines?

Usually only the visible surfaces of an object are drawn in isometric, with hidden lines left out. Although this is considered the preferred practice, there are always times when hidden lines are needed to clarify very complex isometric drawings.

Which of the following is hidden line?

Answer: dashes- It is standard practice to use dashes to represent any line of an object that is hidden from view.

What is the sign and symbol of hidden line?

Hidden lines indicate invisible edges or contours. Hidden lines consist of short dashes evenly spaced and are frequently referred to as dash lines.

Which of the lines below is used to indicate hidden lines?

It is standard practice to use dashes to represent any line of an object that is hidden from view.

What is the usual gap between section lines?

Explanation: The distance between two section lines is pitch of the section line. There is no fixed point or distance at which the section line is draw. It is generally in between the 1 to 3 mm is depending upon the size of the object. Pitch of section lines is one of the most important topics in section lines.

How many views do we need to completely describe a block?

Three views are not always necessary; we need only as many views as are required to describe the object fully. For example, some objects need only two views, while others need four.