How do I connect my home theater to my cable box?
Plug an HDMI cable into the HDMI output on the cable box. Plug the other end into an HDMI input on your HDTV. Inspect your television auxiliary sound output and your surround sound stereo auxiliary input to determine if they both have RCA ports or HDMI ports.
Which is the best amplifier for home theater?
6 Best Home Theater Amplifiers Comparison Table
| Home Theater Amplifier | Number of Inputs | Number of Channels |
|---|---|---|
| Yamaha RX-V385 | 4 | 5.1 |
| Marantz NR1510 UHD AV Receiver | 6 | 5.2 |
| Integra DRX-5 | 6 | 9.2 |
| Denon AVR-X8500H Flagship Receiver | 8 | 13.2 |
How do I connect two home theater systems?
All you’ll need to do is the following:
- Connect your input device to your home theater receiver as normal.
- Plug your HDMI matrix into the output 1 port on the back of your receiver.
- Next, plug in the cables for your multiple output sources and then hook these up to the devices.
What is a 12v trigger cable?
Power trigger cables for connection between e.g. amplifier and subwoofer, or pre- and power amplifier, so the units turn on and off together.
Can I use a stereo cable for 12v trigger?
You absolutely can use a stereo cable. Everything is the same except for the division between the ring and the sleeve on the stereo one. You aren’t going to short anything or reverse polarity or literally cause any issues by using a stereo cable. Trigger works now.
What is trigger output?
A trigger is a device that facilitates simultaneously powering on and off multiple components within a larger stereo or home theater system. For example, use a trigger to automatically turn on a projector, receiver, amplifier, AV processor, TV speakers, and more when you activate a single device.
What is a trigger cable used for?
basically it is a low voltage signal that becomes active when you turn a preamp on so that the power amp will power on at the same time without being manually switched on, kind of like a wired remote control. very handy in aftermarket mobile audio amplifiers.
What is a subwoofer cable?
Subwoofer cables are a type of audio cable that can greatly increase sound quality. They are used for the purpose of connecting any media device that supports coaxial (S/PDIF) audio interface. Subwoofer cables contain RCA connectors on both ends. Subwoofer cables help make sound feel real.
What does remote wire do on AMP?
When the ignition of the vehicle is turned off, the remote turn on wire stops transferring voltage and the amplifier turns off. If the remote turn on wire is connected to a wire in the vehicle that has constant voltage, the amplifier will always be on.
How do you connect a 12v trigger to a projector?
When active, a 12V signal is sent to the connected device while the projector is powered on.
- Connect a 3.5 mm stereo mini-jack cable to the external device’s trigger port.
- Connect the other end to one of the projector’s Trigger Out ports.
- Activate the trigger port in the projector’s Settings menu.
What is 12v out on a projector?
A 12 volt trigger allows the projector, upon power up and power down, to automatically drop and raise a motorized screen.
How do you power a projector screen?
Power the projector off and the screen retracts back into the casing. No further maintenance is necessary. Keep the wireless 12-volt trigger plugged into the projector. The projector’s power switch will activate the screen.
What is trigger in projector?
[17:44] Jaime: The 12-volt trigger is a mechanism that allows your projector’s power cycle to coordinate with the projector screen’s drop and rise functions. When the projector powers on, it signals the screen to drop. When the projector powers off, the screen retracts back into the casing.
How does a 12V trigger work?
If the switch is set to the ON position, the power amplifier will remain in standby mode until it detects a 12 volt signal at the 12V Trigger Input on the back panel. When the 12 volt signal disappears, the amplifier will return to standby mode.
How do I minimize my projector screen?
Wall Switch Method:
- Locate the Projector Screen Wall Switch. It can typically be found on a wall near the projector screen.
- To raise the screen, press the UP button. To lower the screen, press the DOWN button. To pause the screen while it is being raised or lowered, press the STOP button.