How do I fix the time on my Jeep?

How do I fix the time on my Jeep?

Most new Jeep models in our lineup feature the Uconnect infotainment system. To help set the clock, first, you must locate and press the ‘Time’ button, which can be found on the outside of the Uconnect unit. After holding down the ‘Time’ button for a few seconds, you’ll notice the time display starts to flash.

How do you change the time on a 2014 Jeep Patriot?

Follow these simple instructions to set the time on your clock:

1. Press and hold the “TIME” button until the hours blink.
2. Turn the “TUNE/SCROLL” control knob to set the hours.
3. Press the “TUNE/SCROLL” control knob until the minutes begin to blink.
4. Turn the “TUNE/SCROLL” control knob to set the minutes.

How do I set the clock in my 2011 Jeep Grand Cherokee?

2011- 2019 Models Switch on/Press in the start button without starting the engine. Press the menu button to the right of the console screen. On the screen, touch System setup, then Time setup.

How do you set the clock in a Dodge Durango?

How to Set the Clock in a Dodge Durango

1. Locate the “Time” button in the upper right corner of the audio systems panel in your Dodge Durango.
2. Use the “Tune/Audio” control dial located on the right side of the audio systems panel to set the hour on the clock.

How do you set the clock on a Dodge Dakota?

How to Set My Dakota Truck Clock

1. Turn the Dakota’s ignition on. Find the “Time” button on the top part of the radio control panel.
2. Push and hold the “Time” button. After a couple of seconds, you’ll notice the hour display starts to blink.
3. Turn the “Tune/Scroll” knob to adjust the hour.

How do you set the clock on a 2003 Dodge Ram?

Turn the key to the ON position (DO NOT start the ignition). Press and HOLD the SETUP button (located to the right of the display). Press the KNOB/DIAL on the RIGHT side to change the HOUR.

How do you set the clock on a 2007 Dodge Charger?

Clock Setting Procedure

1. Press and hold the time button until the hours blink.
2. Adjust the hours by turning the right side Tune/Audio control.
3. After the hours are adjusted, press the right side Tune/Audio control to set the minutes.
4. Adjust the minutes using the right side Tune/Audio control.

How do you set the clock on a Chrysler 200?

To set the analog clock, located at the top center of the instrument panel, press and hold the button in until the setting is correct. The clock will adjust slowly at first and then quicker the longer the button is held.

How do you set the clock on a 2007 Chrysler 300?

How to Set Clocks in a Chrysler

1. Insert the key in the ignition and turn it to the “Accessories” setting.
2. Press the “Set” button on the far right of the radio.
3. Push the “Sel” button once.
4. Press the “Tuning” button up or down to change the hour.
5. Push the “Sel” button once again.

How do you set the clock on a 2006 Town and Country?

BenHertz

1. Press the SET button and “P” will be displayed.
2. Press the SEL button and the hour will be displayed.
3. Rotate the tuning knob to change the hour setting.
4. Press the SEL button again to display minutes.
5. Rotate the tuning knob to change the minute setting.
6. Press the SEL button once again to complete the procedure.