How do I know what size fuel injectors I need?
For example, a naturally aspirated, 300 hp engine (BSFC 0.5), with 8 injectors will need 23.4 lbs./hr. of fuel per injector at an 80% (0.8) duty cycle. (300 X 0.5) รท (8 X 0.8) = 23.4 lbs./hr. You might not find a fuel injector rated for your exact needs.
What size are D16Y7 injectors?
Stock Honda Acura Injector Sizes
| Engine Code | Year | Stock Flow Rate (cc/min) |
|---|---|---|
| D16Y7 | 1996-1997 | 180 |
| D16Y8 | 1996-1997 | 240 |
| D16Z6 | 1992-1995 | 235 |
| D15B7 | 1992-1995 | 235 |
Are B Series and D Series injectors the same?
How did you get D series injectors to fit into a B series? You just put them in like a normal injector. They’re physically the same size.
How much oil does a k20 take?
Engine Oil
| Viscosity: | 10W-30 (Above -18) SAE 10W-30 is preferred. 15W-40 (Above -12) 20W-20 (Above -7) |
|---|---|
| Capacity: | 5 quarts. (with filter)After refill check oil level. |
| Torque: | 20 ft/lbs (Oil Drain Plug) |
What happens if your fuel injectors are too big?
Bigger injectors on their own will just increase fuel usage, make the engine run rich, which leads to running problems – it won’t tickover, it won’t pull cleanly through the rev range and you’ll risk major damage through ‘bore wash’ – where the fuel literally washes the oil away.
How much HP can 750cc injectors make?
Regardless of what some calculators may say, healthy 750cc injectors will easily and safely support over 800BHP all day long on gasoline.
How much power can 1000cc injectors handle?
The 1000cc Injectors can support 650+whp.
How much horsepower can fuel injectors add?
Larger throttle body and injectors Depending on what type of engine you have, you can gain as much as 10-20 more horsepower and comparable torque. There is a catch, however. Go too large and you can lose power.
How much HP will 60lb injectors support?
60′ will support 600+ rwhp with pump fuel…not the case with e85 at those levels!
How much HP will 42lb injectors support?
Registered. 42lb’ers should be able to support close to 100hp a piece at 100% duty cycle, Your injectors must be dirty or something if they are maxing out at your power level.
How much HP can 650cc injectors hold?
So 650cc injector= 650hp if injector is running at 100% duty cycle. I would scale it down a bit to around 80-85% duty, so that would put you at around 520-550hp range. A single walbro can flow enough fuel to feed the car about 500-550hp, but I would advise against it.
What is the lifespan of a fuel injector?
between 50,000 and 100,000 miles
Should I replace all fuel injectors at once?
When it comes to your diesel fuel injection system, a single injector is often the cause of an entire engine failure. This is why it is often best to replace multiple injectors at once.
Can you replace only 1 fuel injector?
Yes, you can replace just 1 fuel injector.