How do I pair my Ford key fob?

How do I pair my Ford key fob?

Step-by-Step Programming Instructions

1. Shut the car doors, then open the driver-side door. Press the UNLOCK button the driver-side door.
2. Now, turn the ignition from OFF to RUN 8 times.
3. Press any button on the Ford remote to program it.
4. Have more than one key fob?
5. Lastly, turn the ignition OFF.

How do I sync my key fob?

How to Program a Key Fob in 5 Simple Steps (Car Key Guide)

1. STEP 1-Turn on the ignition. You should sit in the driver’s seat with both the ignition key and the key fob with all doors closed.
2. STEP 2-Press the lock button.
3. STEP 3-Turn off the ignition.
4. STEP 4-Repeat the process with other key fobs.
5. STEP 5-Restart the process.

How do you program a key fob for a 1997 Ford Explorer?

1997 Ford Explorer

1. Enter Vehicle Programming Mode. INSERT key into Ignition and TURN from OFF to RUN 5 times within 10 seconds, with the 5th time ending in RUN.
2. Program Remote. Within 20 seconds press any button on first keyless remote fob.
3. Exit Programming Mode. Turn ignition to OFF.
4. Test Remotes. Test all remotes.
5. Share.

How do you program a key fob for a 2004 Ford Explorer?

INSERT key into Ignition and TURN from OFF to RUN 8 times within 10 seconds, with the 8th time ending in RUN. Door locks will cycle to confirm Programming Mode. Within 20 seconds press any button on first keyless remote fob. Door locks will cycle to confirm programming.

How do you program a Ford Explorer?

Insert the key you want to program into the ignition cylinder within 20 seconds of removing the last key. Turn the key to the “On” position for at least three (but no longer than 10) seconds. Turn the key to the “Off” position and remove it. Re-insert the key and try to crank the engine.

What is the factory set code for Ford Explorer?

Look for the factory code. The 5 digit security code is usually in the glove department if you have not moved the owner’s wallet card. The 5 digit code can also be found on years 2011- 2018 on a white label inside passenger side fuse box, it will be the 5 numbers you need, followed by a letter.

How do I get the factory code for my Ford f150 keyless entry?

Insert the key in the ignition and turn it to on position for about 5 seconds (don’t start the car). After 4-5 seconds, turn off and remove the key. Now insert the second key into the ignition and turn it to on position. After few seconds the factory key code will be displayed on the instrument cluster display screen.