How do I program my directv remote to my apex TV?

How do I program my directv remote to my apex TV?

Manual programming

1. Look up the 5-digit code for your brand of TV.
2. Find the MODE switch on the remote control and slide it to the TV position.
3. Press and hold MUTE and SELECT buttons simultaneously.
4. Enter the 5-digit code.
5. Aiming the remote at the television, press VOLUME UP.

How do you set a universal remote control code?

Direct Code Entry

1. Turn on the device you want to control.
2. Press and hold the appropriate DEVICE button on your Universal Remote Control (some remotes require that you press a Setup button before pressing the device button).
3. With the device button on the remote held down, ENTER THE CODE for the brand of the device.

Where is the code for a universal remote?

Your remote control model number is usually listed inside the battery compartment or on the back of the remote. HELPFUL TIP: If your remote control uses a 3 digit setup code, simply drop the first zero from any remote code you find on our site that is 4 digits.

How do you program a one for all remote with the magic button?

How to Program your One For All® remote

1. PRESS the button for the device you want to program,(TV,VCR,CABLE,etc.), then RELEASE.
2. PRESS and HOLD the MAGIC button until the red LED flashes twice, then RELEASE.
3. ENTER the 3 digit code for your brand.
4. You should receive 2 quick flashes after entering your code.

Why won’t my one for all remote work?

Remove a battery from the remote and press a button to discharge the remote entirely. Reinsert the battery – the LED should blink twice. Press the digits 2 and 8 simultaneously within 6 seconds – the LED should blink twice. Enter the code 9 8 1, the LED will blink 4 times.

How do I reset a one for all remote control?

If you wish to return the remote to the default settings, you can perform the following:

1. Hold down the TV Power and Back keys until the ring blinks twice in yellow.
2. Press OPTIONS, REPLAY and HOME consecutively.
3. The ring will blink red 4 times and the remote is now reset.

How do I reset my one for all remote?

All replacement remotes: How do I perform a factory reset on my Replacement Remote?

1. Hold down the GREEN + YELLOW key, until the LED blinks twice.
2. Enter the code 981.
3. The LED blinks now four times and everything is deleted from your remote control.

Why is my remote control not working?

1 Check the Batteries of the Supplied Remote Low battery power can cause the remote to intermittently function, or not function at all. Lift the back cover up and away from the remote. Remove and re-insert the 2 batteries. Replace the back cover on the remote, and slide down to click it into place.