How do I program my Pro 164 trunking scanner?
- Press PROG, then press TRUNK.
- Press FUNC, then use an UP or DOWN ARROW to select a bank.
- Repeatedly press MODE to select a trunking mode (Motorola, EDACS,LTR).
- Press PROG.
- Enter the first control channel freq.
- Repeatedly press MODE to select a trunking mode (Motorola, EDACS, LTR).
How do you program a Radio Shack Pro?
How to Program a Radio Shack Police Scanner
- Set the squelch. Turn the squelch knob located by the volume control both ways until the static stops.
- Add frequencies to your scanner.
- Search for frequencies with the limited-search feature.
- Find a frequency you have programmed in manually.
How do I reset my Radio Shack Pro 164 scanner?
To initialize the scanner, turn the scanner off, turn it on again, when the welcome message comes on the display, press 0, then press 1, then ENT. “Initializing please stand by” appears for about 5 seconds. When the initialization is complete, the scanner will show Bank 0, Ch 00.
How do I program my Scanner Pro 62?
To do this:
- Turn the scanner OFF, then turn it ON again.
- Press and hold down the CLEAR key and insert a pointed object, such as a paperclip or the point of a pen, into the RESET opening in the back of the scanner, and press the button inside the opening.
- Release RESET.
How do I set my Radio Shack weather radio?
- Connect the weather radio to AC power and install the backup batteries.
- Extend the weather radio’s antenna.
- Press WEATHER/SNOOZE to listen to the weather broadcast.
- Repeatedly press. e. or. d. to adjust the broadcast volume to the desired level.
- Press WEATHER/SNOOZE to turn off the broadcast.
- Repeatedly press.
How do I program realistic Pro 2022 scanner?
Turn the VOLUME control clockwise to turn on the scanner. 2. Press [MANUAL], enter the channel number you want to program, and then press [PROGRAM]. ‘PROGRAM’ appears on the display and shows that your scanner is in the programming mode.