How do I reset my ECU i10?

How do I reset my ECU i10?

Firstly bring the car to normal operating temperature by driving for 15 minutes or so. Now open the bonnet and disconnect the earth lead from the battery, ensure this is not touching any part of the bodywork – insulate if necessary – and wait 5 minutes.

How do you know if ECU is reset?

Another sure way, disconnect a sensor, or do something to throw a CEL, then re-connect it. if the CEL isn’t there after the reset, then the ECU has been reset.

How do I reset my Fiat Ducato ECU?

To reset the ECU just disconnect the negative terminal of the battery for 30mins. Then connect and idle for few minutes and then go for a long spin as if you’ve stolen the car!! This is to ensure your ECU gets the maximum reading cause it has been reset and now it has to store back all the values it lost.

What is phonic wheel learn?

If you replace the crank sensor or mess with it or the crank pulley, you should teach the ecu the new sensor and settings. This is called phonic wheel learn. This is necessary as the sensor is inductive and measures a changed of magnetism cause by the crank ring turning, and is very sensitive.

How do you reset the battery on a Fiat 500?

To do a battery reset on a Fiat 500:

1. Disconnect the negative battery cable and hold the brake down for about 5 minutes.
2. Wait 20 Minutes, then hook up the negative.
3. Turn ignition on and wait 1 minute before starting.

How do I reset my Fiat 500 radio?

Anonymous. With all doors closed, put key in ignition and turn key to first position only, and fully depress and release the accelerator pedal 5-7 times. Pedal must be pressed all the way down and fully released these 5-7 times.

Does Fiat 500 have radio code?

Once you have removed the radio, you will be able to locate the unique serial number and part number. Once you have the details required, you can get the original Fiat 500 Radio Code to unlock the CD player or infotainment system using our secure online service, or you can request the code by telephone.

Are Fiat 500 radios coded?

Fiat 500 Radio Codes are displayed immediately on your mobile phone, tablet or computer from the serial number found on the CD Player or Sat Nav system.

How do I enter my Fiat radio code?

How to Enter your Fiat Radio Code

1. When the radio is turned on, “CODE IN” will show on the radios display.
2. Press button 1 until the correct first digit of the code is displayed.
3. Press button 2 until the correct second digit of the code is displayed.
4. Press button 3 until the correct third digit of the code is displayed.

Where can I find Fiat 500 radio code?

Fiat 500 radio serials are found located on the code label,. It will begin with BP or CM, followed by 12 characters. Examples: BP738982412152 or CM0336C8888888. You also need to note the Part Number which starts with “76” + 8 digits.

How do I contact Fiat?

To find out, you can call the Toll-Free Number 00800 34280000 or check directly at an Authorised Service Centre.

Where is the fuse box on a Fiat 500?

The interior fuse panel is part of the Body Control Module (BCM) and is located on the driver’s side under the instrument panel.

How do you change a fuse on a Fiat 500?

Step-By-Step Guide to Changing Fuses

1. Pull the hood release lever by the driver’s seat to raise the hood.
2. Remove the bolt and cover from the fuse box under the hood.
3. Check your owner’s manual to find the number and location of the fuse you need.
4. Pull the fuse in question with a fuse puller or needle-nose pliers.

Does the Fiat 500 have a cigarette lighter?

The cigarette lighter of a Fiat 500 L is a cylindrical electric element. At the bottom of it there is a conductive part with 2 tabs allowing electricity to circulate to heat the resistance of the cigarette lighter. To know :The cigarette lighter generally receives 12 volts.