How do I reset my thermocouple?
Press the reset button on top of the box to turn on the pilot light. Hold the reset button between 30 to 60 seconds to give the thermocouple time to heat up. Release the button to see if the pilot light goes out. The pilot light should stay on after the reset.
How do you reset a pilot light?
Once the gas has had time to dissipate, turn the knob to “Pilot.” Then, hold down the “Reset” button and bring the flame of a long lighter close to the pilot light opening. This should light the furnace pilot light. Once you are sure the pilot light is on, release your pressure on the reset button.
What causes the pilot light to go out?
Thermocouple Malfunction It is positioned very close to the flame, and when lit, the pilot light tells the thermocouple to keep the gas line open. A thermocouple that is dirty or malfunctioning will often shut off your gas supply in error, causing the pilot light to go out and your furnace to stop working.
Is it dangerous if your pilot light goes out?
Can a Pilot Light Outage Be Dangerous? The worry here is that when a pilot goes out, the gas valve that supplies the fuel for the pilot flame could still be pumping gas. This can mean a buildup of gas, and when the pilot is relit or relights itself it could result in a very serious explosion.
How do I clean a thermocouple?
The best way to clean your thermocouple is to use either a piece of steel wool or the coarse side of a sponge to gently clean off any soot or other remnants. You can use a pencil eraser to clean between the threads of the screw that connects the thermocouple to the control valve of your system.
Can hot water heaters be repaired?
If your water heater is leaking or not heating up, you may be able to repair the existing unit. Learn the signs of needing a full water heater replacement when the time comes.
What are the signs your hot water heater is going out?
Signs Your Hot Water Heater Is Going to Fail
- Water leaking from the heating tank.
- Age of the water heater.
- Running out of hot water quickly.
- Inconsistent water temperature in the shower.
- Discolored water coming from faucets.
- Unusual noises coming from the water heater.
- Lower water pressure.
How long should hot water last?
between 6 and 13 years
Is it cheaper to have hot water on constant?
It is a myth that leaving your hot water on all of the time will save you money. Unless you need a constant supply of warm water, your boiler will be constantly heating when there is no real need. It is cheaper and more energy efficient to switch your boiler on, only when you need the hot water.