How do I reset my truck after an oil change?

How do I reset my truck after an oil change?

Insert the key into the ignition and turn it to the “on” position without starting the engine. Depress the gas pedal slowly three successive times within 10 seconds. At this point, the system should have reset. You can verify by turning the ignition off and then on again.

How do you reset the oil life on a 2021 GMC Sierra?

For all models, the oil life system can also be reset as follows:

1. Turn the ignition to ON position without starting the engine.
2. Fully press and release the accelerator pedal 3 times within five seconds.
3. Turn the ignition off and start the engine to verify the indicator has been reset.

How do you reset the service light on a GMC?

With the doors closed, insert the key into the ignition and turn the key to the accessory power position. All the lights will be displayed on your instrument panel. Within five seconds of turning the key, depress the accelerator fully to the floor three times. Watch for the oil light to flash and turn off.

How do you reset the oil life on a 2010 GMC Sierra?

Sierra Truck

1. Turn ignition switch to ON position with engine off.
2. Fully depress and release the accelerator pedal 3 times within 5 seconds of turning key.
3. Change Oil lamp will flash for 2-10 seconds while it resets.
4. Once it stops flashing, the maintenance light reset is complete.

How do you reset the oil life on a 2003 GMC Sierra?

Instructions:

1. Turn the ignition to run (one position before starting engine).
2. Immediately after Step 1 press and release the gas pedal 3 times within 5 seconds.
3. If the “Oil Life Reset” appears the system is resetting.
4. Turn the ignition off and then start the engine to verify the indicator has been reset to 100%.

How do you reset the oil life on a Chevy 2500?

Option 1: All Models

1. Turn the ignition to “On“. Do not start the engine.
2. Press the accelerator pedal slowly all the way down 3 times within a 5 second interval.
3. Turn the ignition off.