How do you bypass the security system on a 2001 Chevy Impala?

How do you bypass the security system on a 2001 Chevy Impala?

There is a simple way to bypass the system. To do this you need a 2200 ohm resistor. Take the small yellow and the small black wires off the passlock sensor, then install the resistor between the yellow and black. Perform THIS relearn and the system will be bypassed.

How do you reset the security system on a 2001 Chevy Impala?

Open the trunk or any door of the Impala. Switch the lock to the “lock” position. Remove the key from the ignition. The light on the radio display will flash quickly; this signals that the system is resetting.

How do I bypass GM PassLock?

How to Disable a GM PassLock System

1. Leave the ignition key turned to the “On” position after the vehicle has stalled and will not start.
2. Look at the dashboard and locate the theft system light.
3. Turn the ignition to the “Off” position to disable the PassLock system, and wait for 20 seconds for the system to reset.

How do you reset the anti theft system on a Chevy Impala?

To reset the anti-theft system in the 2007 Chevy Impala, turn the key in the ignition to the “on” position and attempt to fire the engine. Return to the “on” position. The vehicle will not start if anti-theft has disabled the ignition. After 10 minutes, the flashing “security” warning light should power off.

Can Car Alarm cause a car not to start?

The failure of the alarm system may cause the engine not to start. In case it is not working correctly, then you have to shut it off. Your car will not resume its operations unless you fix the alarm complications.

How do you reset the security on a 2000 Chevy Impala?

Impala LS V6

1. switch the car to off.
2. then switch the car to the acc “click” just before the starting “click” on the ignition switch.
3. slowly switch the transmission thru all the gears one at a time, then switch it back thru them to park.
4. try to start it then, 90% of the time it will restart,

How do you reset the security code on a 2004 Chevy Impala?

If its the pass lock system put the key in the ignition and turn it on and try to start the vehicle. After it shuts itself off leave the key on for ten min until the theft light stops flashing the turn key off and try to start it again. This may take a few times….

How do you reset the anti theft system on a 2014 Chevy Impala?

To reset Your 2014 Chevy Impala theft-deterrent system, use Your keyleSSRemote to unlock the doors by pressing the “Unlock” button. This button looks like an opened lock. Exit the car and leave the door open. Press the lock switch from inside the car to lock the doors.