How do you change the gearbox oil on a Transit Connect?

How do you change the gearbox oil on a Transit Connect?

First You will need to get under Your van and then You can locate the transmission and the drain plug on the side of it. Unscrew the drain plug and allow it to drain into an oil catcher or bucket. After that replace the plug with a fresh washer and bolt and make sure it is sealed.

How much oil does a Transit Connect gearbox take?

Engine capacity: 1796 ccm (109,04 cubic inches). Ford Transit Connect engine oil capacity: 4.25 liters or 4.49 quarts US or 1.12 gallons US. Ford Transit Connect manual gearbox oil capacity: 1.9 l or 2 US qt or 0.5 US gal.

How many quarts of oil does a 2016 Transit Connect take?

5.7 quarts

What oil do I put in my Ford Transit Connect?

FORD TRANSIT VAN CONNECT (02+) BRITOIL FULLY SYNTHETIC ENGINE OIL 5W30.

Does Cummins recommend synthetic oil?

Valvoline Premium Blue Extreme Full Synthetic Engine Oil is exclusively endorsed and recommended by Cummins, meeting API CJ-4 specifications, including Cummins CES 20081.

How much oil pressure should a diesel have at idle?

Normal driving ~20 psi at idle on a mechanical gauge off the oil filter head directly plumbed into the cab. Hot-rodding ~18 psi at idle and then it comes back up to 20 psi when the engine cools down a bit. Cold start ~90-95 psi at ~2000 rpm. Normal hot cruise ~60-65 psi.

How often should you change oil on 6.7 Cummins?

2019+6.7L Cummins Maintenance Schedule – Normal Operating Conditions

Maintenance/Service	Miles	Months
Change Oil	15,000 miles	12 mo.
Change Oil Filter	15,000 miles	12 mo.
Change Engine- mounted Fuel Filter	15,000 miles	12 mo.
Change Chassis- mounted Fuel Filter	15,000 miles	12 mo.

What causes high oil pressure?

Oil quality and viscosity: When oil is thicker (i.e: more viscous) it faces more resistance when passing through the engine’s passages, leading to higher oil pressure. Changing the viscosity grade to a thicker or thinner oil has an effect on the oil pressure.