How do you change the oil filter on a Ford Escape?
Ford Escape oil change steps
- Raise the front with ramps or a jack and jack stands.
- Remove the under engine trim panel.
- Remove the drain plug and drain oil.
- Re-install drain plug.
- Remove and replace oil filter.
- Refill with fresh oil and check for leaks.
- Replace all removed components and reset service light.
What oil filter do I need for a 2006 Ford Escape?
Motorcraft – Original Equipment Oil Filter (Part No. FL-820S)
How much oil does a 2006 Ford Escape take?
6 quarts
What oil filter does a 2008 Ford Escape use?
Where is oil filter on 2008 Ford Escape?
The oil filter in the Ford Escape is behind the front bumper, juSTSlightly off-center on the passenger side. It is close to the oil pan. You will need to use jack stands to access the filter and drain plug. Ford recommends changing the oil in this vehicle every 7,500 miles, so You can have the filter changed then.
How much oil does a 2008 Ford Escape take?
6 quarts (with filter)After refill check oil level.
What type of oil does a 2009 Ford Escape take?
The recommended oil for the 2009 Ford Escape iS5W-20 Synthetic for both the 2.5 L 4Cylinder and the 3.0 L V6 engine. The capacity for the vehicle iS4. 5 quarts with a filter for the 2.5 L 4Cylinder and 6 quarts with a filter for the 3.0 L V6 engine.
What oil does a Ford Escape use?
For the ford escape it is recommended to use 5w-20 or 5w-30 synthetic motor oil.
How much oil do you put in a 2009 Ford Escape?
2009 Ford Escape – Specs
Engines | Duratec 25,I-4 | Duratec 30, V6 |
---|---|---|
Fuel Injection | Sequential multi-port electronic | Sequential multi-port electronic |
Oil Capacity | 5.0 quarts with filter | 6.0 quarts with filter |
Coolant Capacity | 5.3 quarts(manual) | 10.6 quarts |
6.9 quarts (automatic) |
How do you reset the oil light on a 2009 Ford Escape?
To reset the oil change indicator on the 2009 ford escape first turn the key to the on position, right before fully starting. Then you press the setup button until oil life x*x% hold reset = new” shows. Next you press and hold the reset button for a couple of seconds then release this should reset it.
How much oil does a 2010 Ford Escape v6 take?
Engine lubricant oil capacity: | 5.7 liter / 6 U.S. qt / 5 imp. qt |
---|---|
Engine coolant capacity: | 10.1 liter / 10.7 U.S. qt / 8.9 imp. qt |
Fuel tank capacity: | 62 liter / 16.4 U.S. gal / 13.6 imp. gal |
How many quarts of oil does my 2010 Ford Escape take?
The 2010 Ford Escape 2.0l engine oil capacity iS4. 5 quarts. The Ford approved engine oil is the SAE 5w-20.