How do you check tire pressure on a Land Cruiser?

How do you check tire pressure on a Land Cruiser?

You’ll find it low and to the right of the steering wheel on the instrument panel. Hold the button down until the TPMS indicator light in the instrument panel blinks slowly 3 three times. Wait for several minutes with the engine running, to allow the system to record each tire’s pressure, then turn the engine off.

How do you reset the TPMS on a Land Cruiser?

Find the TPMS reset button just below the instrument panel and above and to the left of the brake pedal. Press and hold the button until the TPMS indicator light blinks slowly three times. Wait for several minutes with the engine running, and then turn the vehicle off. The system has been initialized.

What type of TPMS does Toyota use?

Toyota vehicles Sienna (pre-2006), Camry Solara (2004-6), Highlander (2004-7), Corolla (2005-7), and Matrix (2005-7) used an indirect or ABS type TPMS. This system uses the existing wheel speed sensors in the antilock brake system (ABS). The system monitors tire pressures by comparing relative wheel speeds.

How do I reset my Land Cruiser?

MAINTENANCE RESET: TOYOTA LANDCRUISER

1. Turn the Ignition On.
2. Press the ODO/TRIP button to Display ODO.
3. Turn Ignition OFF.
4. Hold and Press the ODO/TRIP button then turn the ignition to On.
5. Turn Ignition OFF.

How do you turn off the maintenance required light on a Toyota Land Cruiser?

Press and hold the trip meter reset nob (next to your Toyota Land Cruiser’s odometer). While holding the trip meter reset nob, turn the ignition to ‘ON’, but do not start your Toyota Land Cruiser. Hold the meter reset until the MAINT REQD light switches off.

How do you turn off the timing belt light on a 80 series Landcruiser?

In your instument cluster there is reset button. There is a rubber plug that you will need to pull out. The reset button is behind it. It should be right next to the trip odometer reset.

What does it mean when your timing belt light comes on?

It is probable that it is just a mileage-activated warning, so really just a reminder. In that case the belt might have already been changed, but the reminder light not reset at that time. Or it could be some output from a sensor that is indicating a possible problem.

What is the T belt light on a Toyota?

It’s just a reminder that it’s time for a new belt.