How do you clear the error code on a Nissan Forklift?

How do you clear the error code on a Nissan Forklift?

To erase your Nissan forklift codes, the repairs must first be made. Following the necessary repairs, return to Diagnostic Mode. Hold the accelerator down for a minimum of 10 seconds, then release the accelerator and the Nissan forklift codes should be erased.

How do you reset a forklift?

Toyota forklift maintenance reset

1. Press and hold buttons B and D simultaneously for 2 seconds. A short beep should sound both at the beginning of the 2 seconds and after 2 seconds has passed.
2. Press button C within 10 seconds.
3. Within 10 seconds, press and hold buttons B and D simultaneously for 2 seconds.

How do you clear error codes on Yale forklift?

The only way to resolve those codes is with the dealer’s service software.

1. Start the stopwatch and turn the forklift key switch on simultaneously.
2. Wait 3 seconds, then press the accelerator pedal five times in quick succession, ending the set of five with the pedal fully released.

How do I reset my Yale forklift password?

1. Looking to change the password on your Hyster or Yale forklift?
2. Turn the ignition key to the on position.
3. Press the star button (*) three times.
4. Enter the forklift password and press the star button (*).
5. Now that you’re in the service menu, press the 4 or 5 button to go back 1 level if need be.

How do I change the time on my Yale forklift?

How do I reset the date / time on the control panel?

1. Light the panel up with the flat of your hand.
2. Press the blue menu button enter your pin code and press tick.
3. Then scroll down to advanced settings.
4. Then scroll right to the bottom of that menu to time and press tick.

How do you change the speed on a forklift?

5 What is the top speed of a forklift?…How do I change the speed on my Yale pallet jack?

1. Press horn button, turn on key, horn will sound.
2. Release horn button, press Lift or Lower to adjust speed setting.
3. Horn will sound 1 for low, 2 for medium, 3 times for fast.
4. Lower handle completely…setting is now saved.
5. Turn off.

How can I make my Hyster forklift faster?

That particluar lift is electronic controlled so the only way to turn the speed up or down is to connect the Hyster scanner to the vehicle, put in the password ***** to override the ECU, then adjust the speed in the settings.

How do I reset my Yale HSA6400?

How do I perform a factory reset on the HSA6400?

1. Push the panel up from the bottom and lift it off the mounting plate.
2. Then unplug the mains power.
3. On the back of the panel remove the grey rubber cover, then turn the on/off switch to off using a pointed instrument.

How do I reset my Yale home alarm system?

How do I reset my system?

1. Turn off the power of DVR.
2. Press and hold the reset button. (see image)
3. Turn on the power of DVR & after 10 seconds release the reset button.
4. The DVR will now be in default settings.

How do I reset my Yale house alarm system?

To Reset After an Alarm:

1. Keep pressing Command button until the keypad displays Arm Disarm.
2. Press the blank button under Disarm.
3. Enter your security code and press Command.
4. Select Yes to automatically disarm all the areas authorized for your security code.

Why is my Yale house alarm beeping?

The unit will’ beep’ five times when arming the system to inform you that the battery power is too low. It is required to disable the siren tamper when swapping out batteries. Further details are to be found in the manual. How is the external siren powered?