How do you put the back seat down in a Pontiac Grand Am?

How do you put the back seat down in a Pontiac Grand Am?

It only takes a few minutes to fold your Grand Am’s rear seat.

1. Open the back door. Remove any items on the rear-seat cushion.
2. Press the trunk release button located on the driver-side door panel. Walk to the trunk.
3. Locate the straps toward the back of the trunk compartment. These are the rear-seat back straps.

How do you remove the back seat on a Pontiac Grand Prix?

Pull/lift the tab/lever on each side to release the seat. Lift up and remove the seat. Clean the seat or do whatever it is you wish to do. Your seat has now been taken out and put back in.

Where is the PCM on a 2003 Pontiac Grand Am?

The PCM in a Grand Am is located behind the glove box. You do not need to remove the entire glove box, just the door.

Where is the PCM located on a 2004 Pontiac Grand Am?

The PCM in a Grand Am is located behind the glove box. You do not need to remove the entire glove box, just the door. Remove the glove box by opening the door any emptying its contents.

Where is the PCM located on a 2004 Pontiac Grand Prix?

It is located under driver dash,left of steering column. you will need to remove the panneling by your knees.

How do you take the back seat out of a Chevy Cavalier?

Fold the rear seats down by pulling on the fold down tabs at the top rear of the car seats. Once the seats are laid down, use a hand wrench to undo the bolts at the front of the seat assembly. Go around to the rear of the car and enter through the truck.

Do Chevy Cobalt back seats fold down?

The 2007 Chevy Cobalt has a split-folding rear seat, meaning the rear seatback is separated into two sections. Each section folds down onto the rear seat cushion. Folding the seat down increases your cargo capacity and lets you carry larger items. You may have noticed that the seats have no release levers on them.

Can you jump a Chevy Cobalt from under the hood?

The battery in your 2006 Chevrolet Cobalt is located in the spare tire well in the trunk. When jump starting your Cobalt you should find a marked post for the positive and negative cables under the hood where you can connect the jumper cables.

How do you open a trunk without a key from the outside?

How to Open a Trunk Without Keys

1. Slide the hook end of the slimjim between the the passenger side window and window trim at the bottom of the window near the door handle.
2. Feel around with the slimjim for the lock rod.
3. Pull up on the lock rod with the slimjim.
4. Open the door and climb into the driver’s seat.

How do you unlock a car door without a key from the outside?

10 Methods That Can Help You Open the Car If You Locked Your Keys Inside

1. Method #1: Use a tennis ball.
2. Method #2: Use your shoelace.
3. Method #3: Use a coat hanger.
4. Method #4: Use a rod and a screwdriver.
5. Method #5: Use a spatula.
6. Method #6: Use an inflatable wedge.
7. Method #7: Use a strip of plastic.

How do you unlock a door without a key?

A small or thin screwdriver will work best on interior doors or doors with privacy handles. Simply push the screwdriver into the hole on the doorknob straight through for as far as you can. Then, turn or twist the screwdriver until the lock opens.

Can you open a locked door by removing the hinges?

So the only way to get a door open when you’re on the outside and it’s locked from the inside is to remove the door from its hinges. Don’t worry, removing a door from its hinges is an easy task that can be done in under a minute. Best of all, it only requires a hammer and a small screwdriver!