How do you remove hydrogen sulfide from well water?
Since hydrogen sulfide occurs as a gas in water, it can be physically removed by injecting air into the water and allowing the gas to escape. Aeration units may work by cascading, bubbling, or stripping the gas from the water. Aeration may be advantageous because it does not add chemicals to the water.
How do I fix my well water smelling like eggs?
Increase the water heater temperature to 160 degrees Fahrenheit (71 degrees Celsius) for several hours. This will destroy the sulfur bacteria. Flushing to remove the dead bacteria after treatment should control the odor problem.
How do you get the smell out of well water?
Use a Chlorinator or Inject Hydrogen Peroxide to Kill Odors J-PRO Odor Killer Well Water Chlorinators Eliminate Both Odors and Odor-Causing Bacteria in your well water. Use 5% grade liquid bleach or 12% liquid pool chlorine OR 7% hydrogen peroxide. The same system can inject either bleach or peroxide.
Is it safe to drink well water that smells like sulfur?
In most cases drinking water that has a strong rotten egg odor, although particularly unpleasant, is perfectly safe to drink. However in some rare occasions the odor may be caused by sewage or other contaminates in a building’s water supply, which could cause health problems.
Why does my well water suddenly smell like rotten eggs?
What Causes the Sulphur Smell in Well Water? The main reason for the smell is sulfur bacteria or hydrogen sulfide. Sulfur bacteria are found in environments that lack oxygen, like deep wells. You’ll also find such issues in areas having plumbing systems and organic matter.
Is it safe to put bleach in your well?
Use liquid household bleach containing 5.25% chlorine for the disinfection process. Do not use bleach with a “fresh scent,” lemon fragrance, or other cleaners added. One gallon of bleach will treat up to an 8-inch diameter well containing 100 feet of water.
How much bleach should you put in your well?
4) Work out how much bleach will be needed: For every 50 gallons of water in the well use one quart of laundry bleach – (4 quarts in a gallon). Do not use excessive amounts of bleach – more is not more effective.
How long do you run water after bleaching well?
Let the chlorinated water stand in the plumbing system for 12 to 24 hours. Do not run any water or flush toilets during this time. Use your reserves of fresh water for all purposes. Step 6 WAIT at least 12 hours before turning faucets back on.
How long does it take for a well to settle?
All in all, with all steps considered, it will typically take between 1 and 2 weeks to have a new well completely up and running. Of course, depending on several factors, it could take shorter or longer than this.
How long does it take for sediment to settle in a well?
I advise people to run the water 15 minutes and off for an hour to clear sediment and chlorine. It may take a few days for the water to clear, be patient.
Why is my new well water brown?
Well water often contains naturally occurring minerals such as sulfur or iron ore. The presence of large amounts of iron can turn your water a brown or reddish-brown color. The iron isn’t particularly harmful, and can even be beneficial, providing iron in your diet.