How do you remove the fuse from a Hyundai Accent?

How do you remove the fuse from a Hyundai Accent?

Fuse removal tool provided in the engine compartment fuse panel. 3. Pull the suspected fuse straight out. Use the removal tool provided in the engine compartment fuse panel….Memory fuse

1. Turn off the engine.
2. Turn off the headlights and tail lights.
3. Open the driver’s side panel cover and pull up the memory fuse.

What is DRL fuse?

Please remember, daytime running lights (DRL) are a safety feature that can help make it easier for others to see the front of your vehicle during the day. If your vehicle is equipped with a “DRL OFF” setting, they can be turned off by twisting the headlight control knob to “DRL OFF.”

How do you remove a DRL fuse?

Turn the headlight knob all the way to the left. On some models of some vehicles, the DRLs are able to be turned off if the headlights knob is turned completely to the left. This cuts the power to the fuse that operates the DRLs.

How do you check a DRL relay?

daylight hours with parking brake OFF and transmission in drive, remove the DRL relay from the socket and use your voltmeter to check for battery voltage on one terminal in the relay socket and partial voltage in another terminal. Then check for good ground on the other two terminals.

How do I know if my DRL relay is bad?

Symptoms of a Bad or Failing Daytime Running Lamp Module

1. Daytime running lamps do not come on. One of the most common symptoms of a potential problem with the daytime running lamp module is daytime running lamps that do not come on.
2. Daytime running lamps stay on while the car is off.
3. Burning smell.

What is a DRL relay for?

The DRL relay contacts close which provides battery power from the EXT LTS fuse through the right HIGH beam headlight and then through the left HIGH beam headlight before reaching ground. By routing the power in series through both HIGH beam headlights, each light burns at half brightness.

What causes running lights not to work?

Common causes for this condition is a loose fitting bulb inside the socket. If the bulb flickers tighten the socket or replace the bulb/socket to regain proper operation. If the complete system flickers (all bulbs flicker) wiggle the tail light fuse, relay and associated wiring at the headlight/tail light switch.

How do I turn on my DRL lights?

To activate your daytime running lights, you must:

1. Have the ignition in the on position.
2. Turn the headlights off, or put them in parking light mode, or auto light mode.
3. The system should automatically turn on if these conditions are met.