How do you reset the anti theft system on a Ford Freestyle?

How do you reset the anti theft system on a Ford Freestyle?

Sit in the driver’s seat with the doors closed. Turn the key in the ignition to ON, so the interior lights and radio work, but the engine isn’t activated. The anti-theft light will either be solid or blinking. Leave the key in the ignition in this position for around 10 minutes.

How do you program a key for a 2004 Ford Freestar?

INSERT key into Ignition and TURN from OFF to RUN 8 times within 10 seconds, with the 8th time ending in RUN. Door locks will cycle to confirm Programming Mode. Within 20 seconds press any button on first keyless remote fob. Door locks will cycle to confirm programming.

How do you reprogram a car key?

Programming a Single Key

1. Insert the key into the ignition, and turn it to the on position.
2. Leave the key in this position for 10 minutes and 30 seconds, and then turn it off.
3. Turn the key back on, and wait for additional 10 minutes and 30 seconds before turning it off again.
4. Repeat the process for a third time.

How do you program a 2004 key fob?

PUSH and HOLD the LOCK and UNLOCK button for 1.5 seconds on the first remote being programmed. As soon as you let go PUSH the LOCK button and HOLD it for 2 seconds. 13. The door locks will cycle to confirm successful programming of the remote.

How do you program a key fob for a 2004 Chevy Impala?

PRESS the DISP button to ENTER Programming Mode. WHEN the message “PUSH FOB” is displayed, PRESS and HOLD the LOCK and UNLOCK buttons at the same time on the first remote to be programmed for 15 seconds. The vehicle will sound to indicate successful programming of the remote.

How do you program a 2004 Chevy Suburban?

2004 Chevrolet Suburban

1. Close All Doors. CLOSE all doors.
2. Enter Programming Mode – Step 1. INSERT key into the Ignition (DO NOT TURN).
3. Enter Programming Mode – Step 2.
4. Enter Programming Mode – Step 3.
5. Enter Programming Mode – Step 4.
6. Program Remote.
7. Program Additional Remotes.
8. Exit Programming Mode.

How do you program a key fob for a 2004 Chevy Malibu?

Press and hold the LOCK button and the UNLOCK button simultaneously on one keyless remote. After a delay of approximately 15 seconds , the doors will lock and unlock to confirm the programming of that transmitter. Repeat the previous step to program up to four transmitters.

How do I get my Chevy Malibu out of theft mode?

First, park the car and make sure all doors are shut and locked. Then, slot in Your key into the driver side door and unlock the car. Once it opens, quickly put Your key into the ignition slot, and set the cars ignition to the ON position. Once the ignition has been set to ON, make sure You dont start the car.

Does a 2004 Chevy Malibu have a chip in the key?

Like most late model vehicles, this 2004 Chevrolet Malibu key has a circuit, chip hidden inside the head of the key.

WHO program key fobs?

Call a local locksmith; they can usually program a key fob significantly cheaper. Average price for programming a key fob is about $60.

Can you program a key fob by yourself?

DIY Key Fob Programming Depending on the age and model of your car, you may be able to program a replacement yourself. The procedure for do-it-yourself key fob programming can vary: Some automakers provide instructions in their owner’s manuals. Information can be found in many cases on the internet.