How do you reset the oil life on a Chevy Tahoe?

Turn the ignition switch to the On position without starting the engine. Gently press the accelerator pedal all the way down to the floor three times within five seconds. The Oil Life should reset to 100%, and the “Change Engine Oil Soon” notification should be cleared.

How do you reset the oil life on a 2007 Chevy Tahoe?

Follow the instructions below to reset the engine oil life system on your Chevrolet Tahoe:

Turn the ignition key to the “ON” position.
Fully press and release the accelerator pedal to the floor slowly 3 times within five seconds.
Turn the ignition off and then start the engine to verify the indicator has been reset.

How do you reset the oil life on a 2012 Chevy Suburban?

Follow the instructions below to reset the engine oil life system on your Chevy Suburban:

Turn the ignition key to the “ON” position.
Fully press and release the accelerator pedal to the floor slowly 3 times within five seconds.
Turn the ignition off and then start the engine to verify the indicator has been reset.

How do you reset the oil life on a 2012 GMC Yukon?

With DIC Button

Put the key in the on position. Keep your foot off the brake and press the START button for 5 seconds.
Go to the OIL LIFE screen.
Hold down the ✓ button.
Turn the ignition off and start the engine to verify the oil life has been reset.

How do you reset the oil life on a 2008 Yukon Denali?

GMC Yukon Change Engine Oil Light Reset Procedures:

Turn ignition switch to ON position with engine off.
Fully depress and release the accelerator pedal 3 times within 5 seconds of turning key.
Change Oil lamp will flash for 2-10 seconds while it resets.
Once it stops flashing, the maintenance light reset is complete.

How much oil does a 5.3 Tahoe take?

The total capacity of the Vortec 5300 5.3L V8 engine for an oil change with filter replacement is 6 U.S. quarts (or 5.7 liters). Insert the automotive funnel in to the oil filler hole and slowly pour in about 5 1/2 quarts of the new SAE 5W-30 oil.