How do you reset the service light on a Range Rover L322?

How do you reset the service light on a Range Rover L322?

L322 (2005-2011)

1. Turn on the ignition without starting the engine.
2. Keep hold the TRIP button until SERVICE message appears and start flashing.
3. Release the button when the SERVICE message stop flashing.
4. Press and hold the TRIP button again until Service Reset appears on the display.

How do you reset the service light on a Range Rover?

Turn the ignition to “on” without igniting your engine (if you have push-button start, press your button once without touching the brake pedal. Open the driver’s door. Depress and hold the gas and brake pedals for 60 seconds. Then turn the ignition to “off” and verify that the light has been reset.

How do you reset the oil light on a 2008 Range Rover?

Press and hold the trip reset button. Turn the ignition switch on to the ignition position II (one position before starting engine). If the SII (Service Indicator Interval) function is enabled the information display will flash SERVICE for 5 seconds and then display SERVICE constantly.

How do I reset my Range Rover 2020?

How do I perform a reset, when my screen is blank?

1. To reset the device, simultaneously press the Power on and Volume up button for 10 – 12 seconds.
2. The device will power down and then automatically reboot.
3. Device will now power on, perform and charge as expected.

How do you reset the service light on a 2014 Range Rover Sport?

2014-2020 Land Rover Range Rover Sport Oil Light Service Minder…

1. Open the bonnet.
2. Turn the ignition key to the “ON” position without starting the engine.
3. Open the driver’s door.
4. Hold the accelerator and brake pedals all the way down.
5. Turn the ignition OFF and start the engine to verify the indicator has been reset.

How do you reset the service light on a 2013 Range Rover Sport?

How to Reset the Service Indicator On Land Rovers

1. Key on, engine OFF.
2. Open door.
3. Open bonnet (hood)
4. Depress the accelerator pedal simultaneously for ten seconds, release.
5. service interval is now reset.

How do you reset the service light on a Range Rover Sport?

Reset service light indicator Range Rover Sport

1. Turn off the cars ignition.
2. Hold down the reset button on the dash board to zero the mileage.
3. Turn the cars ignition on, but do not start.
4. A menu will come up, like date/mileage.
5. Let go and then press the button again.
6. It will toggle through some options, then get to rst.

How do you reset the service light on a 2011 Range Rover Sport?

Manual Reset Procedure:

1. Press and hold the trip reset button.
2. Turn the ignition switch on to the ignition position II (one position before starting engine).
3. If the SII (Service Indicator Interval) function is enabled the information display will flash ‘SERVICE’ for 5 seconds and then display ‘SERVICE’ constantly.

How do you reset the check engine light on a 2016 Range Rover Sport?

Reset Your Check Engine Light: Disconnect the Battery

1. Turn off your vehicle and put on the proper safety gloves and glasses.
2. Locate your battery under the hood and find the negative terminal.
3. Use a wrench to loosen the negative terminal connector.
4. Carefully hold it to the side for 30 to 60 seconds.

Why is my Land Rover engine light on?

When your check engine light comes on, this could be as simple as tightening or replacing your gas cap. One of the most prevailing and frequent cause is that your Land Rover Range Rover gas cap is loose, damaged or missing. The gas cap for your Land Rover Range Rover serves multiple purposes.

Can you clear check engine light?

The simplest most straightforward way to get rid of the check engine light is to drive it for a little bit, and the light will turn off by itself. Once you drove your car for a couple of days (e.g., usually three days), the check engine light should be gone.