How do you test a fuel pump on a Harley?

How do you test a fuel pump on a Harley?

Basically, open the fuel tank and with a half a tank or less of fuel, start bike, look in the tank with a flashlight while the engine is running and look for a spray or mist in the tank. If you see that then it is a cracked fuel flange. It’s not how fast you go, it’s how fast you get there!

How often should you change a Harley fuel filter?

For fuel inj bikes, the filter is in the gas tank. My 2001 HD service manual states to change every 50,000 miles.

What size is Harley fuel line?

Factory lines are 1/4″.

How do you set the clock on a motorcycle?

Press and hold the LEFT-TOGGLE switch until the hour segment flashes….

1. With CLOCK TYPE highlighted in the SET UNITS menu, press LEFT-TOGGLE.
2. Press RIGHT-TOGGLE to select 12 hour or 24 hour.
3. Press LEFT-TOGGLE to set the desired clock format.
4. Press RIGHT-TOGGLE to select EXIT.
5. Press LEFT-TOGGLE to exit.

How do you change the time on a Honda Hornet?

All we have to do is to adjust the time of CB trigger, Press and hold both RESET and SELECT button together for 5 seconds. Now it will start blinking the Hour display (Edit mode). then press SELECT button to increase the value. once we set the Hour value then again clink on the RESET to switch to minutes.

How do I set the clock on my victory octane?

1. Turn the ignition off….Tip: The clock must be reset any time the battery has been disconnected or discharged.

1. Turn the key to the ON position.
2. Press and hold the mode button until the hour segment flashes.
3. With the segment flashing, tap the mode button to advance to the desired setting.

How do you change the time on a victory highball?

you set the clock by pressing and holding the button on the front of the left handlebar switch housing until the numbers start blinking. that button also changes modes between odometer, trip meter (press and hold button to reset), and digital tachometer.

How do you change the clock on an Indian Scout bobber?

Use the MODE button to toggle to the Odometer Display .. Press and HOLD the Mode Button Until the Hour Segment Flashes.. Release the Switch .. With the Segment Flashing, Tap the MODE button advance to the Desired Setting ..

How do you reset the trip odometer on an Indian scout?

To reset the trip odometer, use the MODE button to toggle to the trip odometer and then press and hold the MODE button until the trip odometer resets to zero. The engine coolant temperature area displays the temperature of the engine coolant.

How tall are Victory Highball handlebars?

They are 12″.