How do you turn off the interior lights when the door is open on a Jeep Cherokee?
On your turn signal switch should be the light dimmer also. At least mine has the dimmer there. Rotate it so the top is rolling towards you, should dim the dash lights, dome light, etc., and the final click should shut off the dome light completely even when doors open. This.
Why won’t my car door lights turn off?
The likely cause of a dome light not turning off is either the dashboard light control knob being activated accidentally or a broken door switch. You can remove the wire from the door switch, if you are able to access the backside of the switch. The wire pulls off of the switch easily.
Why do my dome lights stay on?
If the dome light is in Auto and its stuck on, usually that means that there is a door not securely shut or just plain open, or that the car has a timer that keeps the dome light on for 30 seconds or a minute after the door is closed for convenience in finding keys or whatever.
Can interior lights drain battery?
Even just leaving a door slightly ajar may be enough to cause the internal lights to illuminate – and if you leave your lights on long enough, your car’s battery will be drained. Luckily, this can be easily fixed with a jump-start, and in most cases, your battery will be just fine afterward.
How long can interior lights be on before battery dies?
A car with the interior lights left on could likely survive six to eight hours, as long as the battery were fully charged and in good condition, in warm weather.
Is it bad to leave car lights on auto?
It is very possible for your car battery to die if you leave it on for 4 hours, but it’s difficult to give exact numbers on how long your car battery will last. Some people can leave their lights on for 4 hours and it won’t die, some people come back to a dead battery if they’ve left it for that long.
Why are my lights still on when my car is off?
How can you tell? The brake light switch is probably out of adjustment, missing, or bad. When you press the brakes, the brake pedal moves away from the brake light switch, causing the brake lights to illuminate. If the switch is bad, they will stay on.
Why won’t my lights turn off?
The most likely error is that the wire going to the light that stays on is contacting one of the live wires. To check, disconnect all the wires from each other, turn on the breaker and use a voltage tester to identify the live circuit wire.