How does a torsion bar suspension system work?
The torsion bar is basically a length of metal rod anchored at one end to the car body and at the other end to the suspension lower link. As the wheel passes over a bump the bar twists. It returns to its original position when the bump is passed and restores the car to its normal drive height.
What does tightening your torsion bars do?
Tightening this bolt turns a key that twists the torsion bar. This extra torque applies more force to the control arm, raising the vehicle to the desired height. Always check for special procedures on the vehicle your adjusting.
When did dodge stop using torsion bars?
1989
How do you adjust torsion bars?
Adjust the torsion bar. Turning the adjustment bolt clockwise will tighten it, raising the amount of load that can be placed on the bar. This will raise the vehicle when it is taken off the jack stand. Turning it counterclockwise will lower the available spring rate and cause the car to sit lower.
Do torsion bars affect alignment?
When raise the front end by turning up the torsion bars you affect the camber and toe in. You also change the “spring rate” meaning the truck will ride stiffer. That being said when done in moderation a lot of guys get by without doing an alignment.
Can torsion bars wear out?
Torsion bars are long metal springs that are used in low-cost car suspension. Torsion bar suspension is used because it is cheap and durable, but it can still go bad. Most often torsion bars are damaged through impacts on the undercarriage or through rust.
Can you drive without torsion bars?
YES!
How much does it cost to replace a torsion bar?
The average cost for torsion bar replacement is between $348 and $375. Labor costs are estimated between $105 and $133 while parts are priced at $242. This range does not include taxes and fees, and does not factor in your specific vehicle or unique location. Related repairs may also be needed.
Do you need an alignment after raising torsion bars?
Yes you do need an alignment, but I don’t think putting a few miles on without one will be a huge problem. Just make sure you get one ASAP.
How far can you tighten torsion bars?
You can go as high as long as you maintain at least 5/8’s of a inch between the UCA and frame stop and that also includes needing to fix the OE shock due to being to short. Either a lower mount or longer shock.
Are torsion bar lifts bad for your truck?
Our favorite feature of torsion bars is that they are super-simple to adjust for ride height. The downside is that there isn’t that much adjustment available in stock guise and when the torsion bars are set to maximum height, the truck’s ride tends to turn horribly harsh.
How much does Pepboys charge for an alignment?
Pep Boys
| Length of Warranty | Average Price | |
|---|---|---|
| One Time | 3 Months | $85 |
| One Year | 1 Year | $110 |
How do I align my front end?
How to Do a Front End Alignment
- Raise both front wheels on jack stands.
- Put the key in the ignition and turn it to accessory, so that the steering wheel will move.
- Look at one wheel at a time from the front of the car.
- Loosen the nut that connects the outer and the inner tire rods.
How long does an alignment take?
Under normal circumstances, a wheel alignment will take an average of one hour, whether it’s a two-wheel-drive or four-wheel-drive vehicle. If there’s too much wear and tear or damage on the suspension system, steering bushing, track rod, or other parts, it’ll take a longer time as some components have to be replaced.
How do I know if my wheels need balancing?
The common symptoms of out-of-balance tires are uneven and faster tread wear, poor fuel economy, and vibration in the steering wheel, the floorboard or the seat that gets worse at faster speeds. When all areas of the wheel-tire unit are as equal in weight as possible, the tire will roll smoothly.
Does tire rotation include balance?
While tire balancing should absolutely happen every time you get your tires rotated, the two processes are not actually the same thing. Rotating your tires means moving them from their current position. Balancing your tires means making sure that the weight of the combined wheel and tire is evenly distributed.