How does a WiF sensor work?

How does a WiF sensor work?

The WiF sensor uses the difference of electric conductivity of water compared to diesel and gasoline to determine the presence of water. The WiF sensor can consist of two electrodes that reads the level of resistance in the fluid or between the ground and the electrode.

What takes water out of diesel fuel?

How to Get Water Out of Diesel Fuel

1. Determine whether there is water in the diesel fuel.
2. Let the fuel settle.
3. Bleed the water from the fuel filter if one is in place.
4. If the fuel is in a tank that does not have a fuel filter, pump the water out from the bottom.

What will water in diesel fuel do?

The presence of water in diesel fuel systems causes a variety of problems. Water rusts steel and iron components, forming loose particles of iron oxide. These rust particles can quickly clog fuel filters. Living bacteria pump out acids as a waste product, further corroding and damaging fuel system components.

Does Diesel 911 Remove water?

To remove water and prevent fuel-filter icing: Add 80 ounces of Diesel 911 to 250 gallons of diesel fuel. For biodiesel blends, add 80 ounces to 125 gallons of diesel fuel. Diesel 911 is safe for use in all diesel engines.

Does seafoam remove water from diesel?

Sea Foam helps lubricate the moving parts, particularly in the fuel system. Ethanol additives dry out the seals and leaves a varnish that makes it harder for oil to lubricate the parts. Inside the fuel tank, Sea Foam absorbs water, allowing it to be burned up in the combustion chamber without issue.

Can I put a whole can of seafoam in my gas tank?

One way is to add Sea Foam Motor treatment when a fuel tank is low. For example, adding a full can (16 ounces) to 8 gallons of fuel is a 2 ounce per gallon ratio. A Sea Foam Spray treatment through any auto gasoline air intake is adding a full can to clean intake valves and chamber areas in a matter of 4 minutes.

Do I use seafoam before or after gas?

Small engines: add whenever you refuel. For engine equipment used regularly, add Sea Foam to a fresh tank fill every 3 months or sooner. For all other engines and fuel tanks (not used regularly): Add Sea Foam to every tank of fuel.

How often should I use seafoam?

How often should I add Sea Foam to my fuel? For cars and trucks driven regularly, put 1 to 2 cans of Sea Foam in your fuel tank every 2,000 to 5,000 miles. For engine equipment used regularly, add 1 (one) ounce of Sea Foam per gallon to a fresh tank fill every 3 months or sooner.

How long do you leave seafoam in your engine?

During pouring in of the seafoam, the car should be on and running. Ensure that you pour the product into the vacuum line slowly such that you do not stall the engine. After getting a third of the seafoam into the intake, you can now turn off the engine to allow the product to soak for at least ten minutes.