How long does a GE refrigerator last?

How long does a GE refrigerator last?

approximately 12 years

How old is my GE freezer?

To determine the age of your appliance, use your serial number (not the model number) to identify the date of manufacture. Our serial numbers begin with two letters followed by six numbers. The two letters at the beginning of the serial number tell you the month and year it was made.

What model is my GE refrigerator?

Find Your GE Top-Freezer Refrigerator Model & Serial Numbers Inside the fresh food section, on the left wall near the top. Inside the freezer section, on the ceiling, near the front.

How do I reset my GE refrigerator freezer?

How to Reset a GE Refrigerator

1. Pull your GE refrigerator out from the wall.
2. Find the electrical cord going into the wall’s electrical outlet.
3. Plug your GE refrigerator back into the wall outlet and listen for it to start up again.
4. Open the freezer to the GE refrigerator and find the small shutoff switch on the icemaker.

Where is the reset button on GE refrigerator?

Reset Button on GE Refrigerator

1. Pull your fridge out from the wall.
2. Next, open the freezer and find the small shutoff switch on the ice maker.
3. You have to push this shutoff arm at the top of the ice maker up and down three times to reset it.

How do you diagnose a freezer problem?

1. Check the temperature setting.
2. Clean the condensor coils.
3. Unplug the freezer, wait two hours and plug it in. If you hear it running, a problem is causing the compressor to overheat.
4. Test the temperature control.
5. Test the evaporator fan.
6. Test the defrost timer.
7. Test the compressor relay.
8. Test the overload protector.

How do you fix a freezer problem?

To solve this issue, you can gently pour hot water down the defrost tube. This should clear out the tube, allowing water to pass through properly. If you do this and still notice sheets of ice in your machine, enlist assistance from a home appliance repair service.

What can cause a freezer to stop working?

Causes: Temperature control thermostat isn’t working correctly. The evaporator fan motor is malfunctioning. The condenser fan motor is malfunctioning.

What is the compressor side of a freezer?

If you have to lay the unit on its side, lay it on the side next to the compressor lines. If the compressor line exits the unit on the right side, lay the fridge on the left side.

Is it better to repair or replace a refrigerator?

As a rule, Consumer Reports recommends replacing a product if the cost of the repair is more than half the price of buying a new one. You can make your own call by checking our updated repair-or-replace timelines.

What causes a fridge compressor to stop working?

The three most common reasons for failures that we see as a result of wear & tear are a mechanically locked compressor, failure of the fan motor, and dirty condenser coils. The refrigerator’s compressor is the heart of the cooling system; without a working compressor the refrigerator cannot function.

How do you reset the compressor on a refrigerator?

How to Reset the Compressor on a Fridge

1. Locate the refrigerator power cord on the back of the appliance.
2. Disconnect the power cord from the wall outlet.
3. Turn both the fridge and freezer controls to “Off” or “0” inside the fridge.
4. Adjust the fridge and freezer controls to the desired setting.

How long does it take to replace refrigerator compressor?

If it is a drink fridge or other small commercial style refrigerator, then compressors are usually available, however a newer one might need to be adapted. The change over time will vary with the complexity of the job to dismantle and replace, but around two hours for a smaller one is reasonable to expect.