How long does it take to replace rear differential?

How long does it take to replace rear differential?

Rear differential bearing replacement. There are side bearings and a pinion bearing which can pit or deteriorate, causing your rear differential noise. These bearings are part of a rear differential overhaul, taking three to five hours to complete.

How do I change my differential cover?

Replacing Your Differential Cover

1. Step 1: Gather Tools and Supplies.
2. Step 2: Drain Differential and Remove Old Bolts.
3. Step 3: Clean Housing.
4. Step 4: Scrape Old Gasket Material.
5. Step 5: Install New Cover.
6. Step 6: Fill With New Fluid.

How do you remove a differential cover?

I just pound a small flat-bladed screwdriver in-between the cover and housing and pry it open. Remember to keep one bolt at the top threaded in a few turns. That will keep the cover from suddenly falling off into to the catch basin, when you finally do get it off, and splashing smelly gear lube everywhere.

How hard is it to change a rear differential?

Bearing replacement on your rear differentials can take up to five hours and require special tools to push them in and out. Gear Replacement. Chipped and worn down teeth on your differential gears also cause the noises you hear when these parts go bad.

Is it safe to drive with a bad rear differential?

Technically, you can drive with a bad differential, but it is not wise. The problem may get worse, to the point where it leaves you stranded somewhere. It can also cause damage to other surrounding components. It is smartest and safest not to drive with a bad differential.

What does it feel like when your rear differential is bad?

Weird Noises Another symptom of a bad differential oil is whirring, whining, or howling strange noises, indicating that the metal part, clutches, gears, and differentials have not been lubricated due to a dirty lack of clean oil.

How do you add fluid to a rear differential?

1. Step 1: Secure the vehicle on jack stands or ramps.
2. Step 2: Allow time for the gear oil to completely drain.
3. Step 3: Locate and remove the gear oil fill bolt.
4. Step 4: Use a pump to slowly add the recommended type of gear oil to the differential.