How many quarts does a 2003 Chevy Cavalier hold?

How many quarts does a 2003 Chevy Cavalier hold?

4 quarts

How many quarts of oil does a Chevy Cavalier need?

5 quarts

How much oil does a 2.2 cavalier take?

Engine lubricant oil capacity:	3.8 liter / 4 U.S. qt / 3.3 imp. qt
	less filter
Engine coolant capacity:	9.1 liter / 9.6 U.S. qt / 8 imp. qt
Fuel tank capacity:	54 liter / 14.3 U.S. gal / 11.9 imp. gal
Battery capacity (Ah):	54

How many quarts of oil does a 2.2 Ecotec motor take?

The items needed to complete this oil change include 5 quarts (4.7L) of SAE 5W-30 oil, an oil filter, a 15mm socket, a used oil catch container, a 1 1/4″ socket (32mm) or the Lisle # 14700 oil filter wrench, a funnel, a floor jack with jack stands or automotive ramps.

How much oil does an Ecotec take?

The oil capacity is 5.3 litres for an ecotec, says so in book and I always have to ensure that i have a bottle with some left over from the last change as a five litre bottle is not enough.

How much oil does a 2008 Chevy Cobalt hold?

Capacity: 5 quarts. (with filter)After refill check oil level.

What kind of oil does a 2008 Chevy Cobalt use?

SAE 5W-30

How do you reset the oil life on a 2008 Chevy Cobalt?

Instructions:

1. Turn the ignition to run (second position)
2. Press the INFO button to scroll until the Oil Life displays.
3. Press the INFO and RESET (arrow) buttons at the same time to display OIL LIFE RESET.
4. Press and hold the ENTER (arrow) button until the cluster shows ACKNOWLEDGED.

What kind of oil filter does a 2008 Chevy Cobalt take?

Carquest Standard – Oil Filter (Part No. R84082)

What kind of oil filter does a Chevy Cobalt take?

Carquest Premium – Oil Filter (Part No. 84082)

What kind of oil filter does a 2007 Chevy Cobalt use?

ACDelco Duraguard Oil Filter Kit.

What oil filter do I need for a 2010 Chevy Cobalt?

K&N – Oil Filter (Part No. PS-7000)

How much oil does a 2010 Chevy Cobalt take?

How do I reset my oil life?

Turn the ignition off, wait a few moments, and then start the engine. Look at the dash to see if the oil light is still flashing or lit. If so, repeat the reset process. If the light is still lit after three reset attempts, contact the manufacturer to learn the correct reset procedure for your vehicle.

What oil does a 2009 Chevy Cobalt take?

Valvoline Synthetic Motor Oil 5W-30 1 Quart.

How much oil do you put in a 2009 Chevy Cobalt?

Is 5W-30 full synthetic?

Keeps engines running like new Mobil 1™ 5W-30 is an advanced full synthetic motor oil designed to keep your engine running like new by providing exceptional wear protection, cleaning power and overall performance.

How many quarts of transmission fluid does a 2009 Chevy Cobalt take?

Say What again! Dry, the trans will take 12.9 quarts, and just removing the lower pan should only require 7 quarts. But it’s possible more drained out. It’s not possible to overfill the trans as long as you refill it following the procedure (which you are), as it’ll push the excess fluid right out that hole.

How many quarts of transmission fluid go in a Chevy Cobalt?

The 2010 Chevrolet Cobalt has a transmission fluid capacity of 6.6 liters or 6.97 US quarts. The recommended F-TYPEor the vehicle is Dexron VI transmission fluid. The fluid is used as oil and a hydraulic fluid to help with gear shifts, to cool the transmission and lubricate moving parts.