How many quarts of transmission fluid does a 48RE take?
Chrysler 48RE Specs
| Transmission: | Chrysler 48RE |
|---|---|
| Max Input Torque: | 560 – 570 lb-ft (Chrysler strength designation “8”) |
| Weight: | ~248 lbs |
| ATF Type/Spec: | ATF+4 automatic transmission fluid |
| Fluid Capacity: | 14.5 – 16.5 dry fill capacity, approx 4 qts service refill capacity |
How much fluid does a 48RE filter change?
a. If only fluid and filter were changed, add 3 pints (1-1/2 quarts) of ATF +4 to transmission. flushed, add 12 pints (6 quarts) of ATF +4 to transmission. 3.
How do you flush a 48RE?
There is only ONE way to do a proper flush, ONE and ONE only. 1st, drop the pan and change filter. 2nd, fill trans and disconnect return line and connect it to a catch bottle. 3rd Start and run in NEUTRAL and fill trans as fluid runs into catch bottle.
How do you check 48RE fluid level?
Put two quarts of new fluid back in through the dipstick tube as normal. Fire the engine or put it back in neutral. Let two more quarts flow out and repeat this process until you see clear fluid coming through the clear tubing.
How do you adjust the bands on a 48re transmission?
to the rear band adjusting screw (1).
- Raise vehicle.
- Remove transmission oil pan and drain fluid.
- Loosen band adjusting screw locknut 5-6 turns.
- Tighten adjusting screw to 8 N·m (72 in.
- Back off adjusting screw 3 turns.
- Hold adjusting screw in place and tighten locknut to.
How do you drain a torque converter on a 48re?
Shut down engine or put in Park. Put two quarts of new fluid back in through the dipstick tube as normal. Fire the engine or put it back in neutral. Let two more quarts flow out and repeat this process until you see clear fluid coming through the clear tubing.
How do you drain a torque converter on a 48RE?
How many speed is a 48RE transmission?
48RE: An electronically controlled four-speed automatic transmission found in ’03 to’07 Dodges.
Do I have 47RE or 48RE?
Externally Late 47re is going to look same as 48re, need to either decode casting numbers or part number stamped on trans case or if trans or look at valve body and planetary, 6 pinion/steel =48re, to be sure.