How many watts does my factory stereo put out?

Standard factory car stereos usually have no more than about 10 watts RMS maximum output power per channel, in spite of what the car dealers advertise. That’s usually not enough power to overcome road noise without sounding shrill.

How many watts does a car radio use?

A car stereo uses approximately 12 watts, on an average, a car stereo is used approximately 3 hours a day. Enter the number of usage hours, power setting (in wattage) and click calculate to find the power consumption of car stereo using 12 watts for 3 hours a day @ $0.12 per kWh.

Is a 200 watt radio good?

Much depends on your listening habits and your speaker’s efficiency. If you like loud uncompressed music and your speakers are 90dB efficient, 200 Watts is likely plenty of power for you.

What is a good wattage for a stereo system?

For most people, 50 watts will be more than enough, and Denon’s least expensive receiver, the AVR-1513, is rated at 110 watts per channel. Watts come cheaply nowadays; sound quality can get expensive.

What happens if my amp has more watts than my subwoofer?

It does not matter as long as the subwoofer has higher power then the amp, you can use a 10W amp on a 100W subwoofer, there is no problem in that, you will get a SPL according to 10W power but the most important thing and that can cause damage if it is done wrong is the impedance, be really carefull to connect the …

Can a 1000 watt amp push 2 15s?

Just make sure your 15″ subs have a rms rating of 1000 watts…. because under powering your subs is worse than overpowering them. And GUH. see less Yes, it will push two 15’s easily.

How many watts do I need for 2 15s?

Average power will likely be 10 W or so, but when the large transients hit, you don’t want distortion, so for 15″, I would guess you’re looking for high SPL, so I would recommend no less than 200 W (quoted RMS amplifier rating).