How much boost can a stock b16 handle?
Re: B16 boosted can handle how much on stock internals? 11-14 psi with a good tune should be enough for a stock sleeves.
Can you turbo a stock b16?
Re: turbo on stock b16 (Phatwhippin_CRX) Yes..
How much power can a b16?
Average numbers for a b16a are 130-40 WHP, and maybe 101 TQ to back it up. general consensus is its a good rev happy motor, but its really lacking in the torque.
How much power can a stock B Series handle?
A stock sleeve B-Series engine can hold power. We’ve made upwards of 700HP on stock GSR sleeves and made multiple 9 second passes, over 200 dyno passes and never cracked a sleeve. That being said, it should be noted: a stock sleeve B18 over 500HP is a timebomb.
How much boost can a stock B18 handle?
B18 internals can handle 300 hp when well tuned. you can run 12lbs, but get it tuned properly. u should reach 275 with 10 or so psi with that turbo.
Is a B20 better than a B18?
The B18 and B20 are the same engine. The B20 runs bigger pistons. That would be like saying if you bored your B18 out to 84mm it would no longer rev because now it is built for towing.
How much HP does a b20b make?
Honda B20B/B20Z engine specs
| Manufacturer | Honda Motor Company |
|---|---|
| Cylinder bore, mm (inch) | 84 (3.31) |
| Compression ratio | 8.8 9.2 9.4 9.6 |
| Displacement | 1972 cc (120.3 cu in) |
| Power output | 94 kW (126 HP) at 5,400 rpm 106 kW (145 HP) at 6,200 rpm 110 kW (150 HP) at 6,200 rpm 110 kW (150 HP) at 6,300 rpm |
Which is better B16 or B20?
Both engines are cool, but the B16A is a better choice. Stock they are similar in performance but with very different power bands. The B16 in stock trim is mild, but has much higher potential. i say b20 unless u have tons of cash to throw into the b16 right of the bat.
Is b20b good for boost?
for all intensive purposes yes you should be fine running some boost through it, just don’t go crazy. Re: B20b Good for Boost?? b20b is 8.8:1 compression b20z is the higher compression motor ~9.6:1 I believe. I had a boosted b20b, ran 9 psi on a 60 trim, had no issues whatsoever.
How much boost can a b20 handle?
It has nothing to do with how powerful your motor is, how much psi you are running, or your compression. You could make 400 horsepower in a b20 and if you never detonated, you would be fine…..
How much is a b20 swap?
b20 longblocks usually go for 500-800 dollars on ebay.
What cars have B20B engines?
The Honda B20 engine is built as a pure DOHC engine found in compact cars from Honda . It is found in the Civic , CRX, CRX Del Sol , Integra , CR-V and some other models.
How long do B18 engines last?
Re: How long do B18 motors last? ( like tngay said they can last over 200k with the proper care. so yes a b18 is good for a good while and 100k is still very good to mod.
What is an LS VTEC?
An LS/VTEC motor combines the bottom end of a non-VTEC b-series motor with a DOHC VTEC head. When using the bottom end from a b20 CRV motor, you get both the torque of a larger motor with the high-end power of a b18c. The LS/VTEC will make more torque and have a wider power band than any other b-series motor.
How much HP can a B18b1 handle?
If you want to save a bit, don’t sleeve it. Just go with forged internals. Properly tuned, stock sleeves can handle 500 whp.
Can you turbo a stock B18B1?
A stock healthy B18B1 can do around 250-280whp safely. The turbo you are going with is a good choice my turbo build is using the same spec turbo. A larger from mount intercooler would be more efficient and drop charge temps better. Get some 750cc injectors and a 255lph fuel pump and have the setup tuned.
How much power does a B18C1 have?
SPEC SHEET
| ENGINE | |
|---|---|
| Engine Code: | B18C1 |
| Displacement (cc): | 1797cc |
| Bore & Stroke (mm): | 81mm & 87.2mm |
| Peak Horsepower (@ RPM): | 485 HP @8,200 RPM |
Can you put a VTEC head on a B18B1?
its called LS VTEC…..and yes it can be done. I would recommend going with a B16 head, you will also have to get a VTEC conversion kit, and I recommend ARP studs, rod bolts, etc. As long as it is done right, it will be a very nice setup.
How much does it cost to go LS VTEC?
Re: Average cost of LS/VTEC conversion? ( it doesnt cost much, most heads go for 300-600 bucks, complete… although ive seen some gsr heads go for 900 bucks!
How much HP does a LS VTEC have?
Re: how much hp does a ls vtec (prcrx124) If you just slap the head on the block, it will have compresion in the 9’s and be similar in hp to a GSR. There are countless variations and combinations of parts to be used in this build.