How much boost can a stock Honda take?
The stock motor can handle aprox. 23psi, assuming the turbo isn’t bigger than a t76. The stock ecu is only good to 17psi, after that you’ll need hondata. Actually, with excellent tuning and the right components, it could handle 20psi safely.
How much boost can stock internals handle?
With stock internals you can measure the life of your engine in seconds if you go over 10 lbs. of boost. If you don’t have the resources to keep putting motors in then stick to 5 lbs, especially if it is your daily driver.
How much boost can a stock d15b7 handle?
i would keep it around 180-190whp it should be safe as long as you have the a/f ratio right and conservative timing. Re: Its not the boost level that will kill the engine, its the power that it puts out.. If your turbo is maxed out at 7psi then turning it up isnt going to get you any more power..
Is B16 good for boost?
Yes, it does depend on the condition of the engine and also how you drive and take care of it, but good tuning goes a long way when the motor is healthy. Re: B16 boosted can handle how much on stock internals? it’s all in the tune. i’d be happy with anything between 275-325.
How much HP can b16 handle?
there have been quite a few threads on this before, search button works great. But it depends on what turbo you will be using. stock b16’s have been good up to over 300hp but the majority of the time they don’t last very long. On a stock b16 i wouldn’t shoot for over 260hp. tune it well.
What’s the best Honda Motor to Turbo?
In stock forum, I’d say the GSR is the better one to boost. With stock boost levels (8-10psi tuned), the additional Vtec would yield much greater results. I have installed turbo kits on LS’s and GSR’s and the GSR’s made about 20-30 more horsepower to the wheels in the upper RPM ranges.
How much boost can a stock B18 handle?
B18 internals can handle 300 hp when well tuned. you can run 12lbs, but get it tuned properly. u should reach 275 with 10 or so psi with that turbo.
How much HP does a B18 VTEC have?
A B18 engine has between 130 to 170 horsepower depending on the model type and variation. The B18 engine is found in either VTEC or non-VTEC variations. Multiple variations of the engine are identified by the letter proceeding the engine number.
How much HP can AB series engine handle?
“In stock form, B series engines can range from 500 horsepower to 1,300 horsepower if it’s a fully built motor. Above that is beyond normal.
How much HP can stock b18b sleeves handle?
Your stock cylinder sleeves can take up to 15psi of boost, but that is PUSHING it, I personally wouldnt go over 10psi with very well tuned set up. nonvtec.com’s April 2005 Ride of the Month Start of the season=13.803@97 Now=12.23@115……
Which is better K20 or K24?
For most street applications, the K20 provides more than enough power to push a lightweight Honda around. For those who want more low-end torque and more over-all power, the K24 is the better choice if you’re willing to pay for it.
How much horsepower can a stock b18c1 handle?
Bottom line Is YES you can run a daily driven car b-motor on a stock block @10lb -14lbs on pump gas and on race gas you can run up to 25lbs !!! so there is no need to build the block if you are never going to see past 14lbs at all.
Which K series engine is the best for Turbo?
The best combination for good power and good torque would be the k20/k24 head and block combination. k24a2 (tsx-short block), and k24a1 (accord long-block). I think the k24a1 accord block is taller and hence has better piston/valve clearance if you plan on running the vtc beyond 40 degrees.
How much horsepower can a stock K24 handle?
about 370 hp
Why put a K20 head on a K24 block?
It is very compatible in performance with the Type S head. I’ve even heard some others say that in some ways it is better… All of the other heads are no good. The Type S has a way better head design and flows much better than the CRV/Accord/Element heads…. But the 2.4L blocks are the key to making more power….
How much horsepower does a K24 engine have?
Honda K24: Tuning Potential The stock power output for the engine can reach 205 HP. With the addition of a turbocharger that power increases to 400HP+. Other performance parts can increase the engine’s power potential to the upper 200s and even 300 HP.
What’s better k20a2 or k20z3?
the k20a2 is the one you want. both are ivtec, but the k20a2 head is more like the b series vtec. the k20z3 ivtec is built for more fuel economy.