How much coolant does a Ford Transit take?
2006 Ford Transit Van Third generation (MK6)
| With engine-independent heating | 13.74 US qt. 11.44 UK qt. 13 L |
|---|---|
| Cooling fluid: WSS-M97B44-D | |
| Otherwise | 13.53 US qt. 11.26 UK qt. 12.8 L |
| Cooling fluid: WSS-M97B44-D | |
How much antifreeze does my van need?
Most cooling systems will hold around 5 litres. DIY Car Service Parts sell engine coolant in 1-20 litre containers, so you can purchase the exact amount that you need.
Can you just top up coolant?
Topping up your coolant is simple. Before you start, park on a level surface and wait for a few hours until the engine is fully cold – if it’s hot, pressurised water can dangerously erupt from the reservoir cap when it’s unscrewed. Fill with coolant: When filling, slowly top-up to the maximum marker.
Is it OK to top up coolant with tap water?
The short answer is no, you can’t mix tap water with engine coolant. Distilled water can work, but it is not ideal. Soft water is the best solution.
How often do you need to top up coolant?
You need to check your engine coolant at least twice a year before summer and winter, ideally. Although, this advice may vary between car manufacturers. Coolant should be topped up whenever the level drops below the guide marks.
How long should I wait to drive after adding coolant?
Typically though it should be left to cool for 1-2 hours before it’s cooled sufficiently to open the rad cap safely. If you’re actually trying to check the coolant level then you probably need to wait more like 3-5 hours (as if the coolant is still warm it will show a falsely high reading due to expansion).
How long does it take for antifreeze to run out?
As the engine gets old, the Coolant evaporates more and more. As a usual calculation, it is found that for every year an engine passes by, the coolant level drops to 0.25″ in 4 months provided that the engine is functioning well and with no leakages or damages.