How much oil does a ZX 6r take?
Just changed mine, took just under 4 qts.
How much oil does a 2004 zx6r take?
Pour your first 3 quarts into the bike with a funnel, then get that . 6 amount by first pouring it into one of the empty quarts for measure. Then pour the final amount in, hand tighten the oil plug.
How much oil does a 2005 zx6r take?
Capacity Dry 3.6 L. (3.8 US qt.) Capacity filter NOT removed 2.8 L. (3.0 US qt.)
What oil does a 2004 zx6r take?
Registered. Mobil1 car oil, silver cap on it, usually in the 10w-30 flavor.
How often should you change zx6r oil?
(You don’t need to change the filter every time you change the oil — see the maintenance schedule in your owners manual. Mine says change the oil every 6000 Km, and change the filter every 12000 Km.).
What oil does a 2007 zx6r take?
you can use the Rotella synthetic or standard oil. i use Mobil 1 racing 4T and a Bosch 3300 oil filter. you can use automotive oil as long as its not Energy Conserving (this will ruin your clutch).
How much oil does a 2007 zx6r take?
It’s in your owners manual dude. 2.9L when filter is not removed(3.1 Qt.) 3.2L when filter is removed(3.4 Qt.) 3.8L when engine is completely dry(4.0 Qt.)
How do you check the oil on a 2007 zx6r?
Start the bike up and let the oil circulate for a minute. Turn the bike off and let the oil settle (a couple minutes). That should give you a good indication of your oil level. If you need to add a little more, then do it.
What oil does a 2008 zx6r take?
ONLY use 10w 40 Make sure it is wet clutch compatible. I run Ams Oil. It should take 3.7 quarts with a oil and filter change.
How much oil does a 2009 zx6r take?
The engine will require 3.1 L of oil with a filter change (including the oil you poured into the filter) or 2.8 L if filter is not removed. Fill until you see oil between the two marks in the sight glass.
What oil does a 2009 zx6r take?
I brought a brand new 09 ninja zx6r. Once I reached to 600 miles, I changed the oil using Shell Rotella T6 Full Synthetic 5w-40.
Can I use WD40 on bike chain?
Can I use WD-40 to lube my bicycle chain? No. You should never use WD40 as chain lubricant since WD-40 is NOT a true lubricant since it’s primary use is as a solvent or rust dissolver.
Is it OK to use car oil in a motorcycle?
In a nutshell – you should definitely use motorcycle specific oil if that’s what your motorcycle recommends, but in a pinch, car oil could work okay. Just be sure the weight is correct.
Is car oil the same as motorcycle oil?
Answer. Motorcycle oils and passenger car oils are very similar, with the exception of a couple of areas that are key to motorcycle operation. So motorcycle motor oil does not contain the friction modifiers of a passenger car motor oil.