How often should pre Drive checks be performed?
How often should pre-drive checks be performed? Every time you drive.
What are three pre driving checks for your car?
Test lights to make sure they are all working. Check location of hazard light button. Check driving adjustments such as seat and steering wheel. Check handbrake operation – hand or foot controlled.
What should you check for outside of the vehicle?
Outside the Vehicle
- Check around the vehicle for obstacles that might interfere with its safe movement.
- Check the driveway, parking area or street for children or other pedestrians.
- Inspect the headlights, windshield, side and rear windows, turn signals, brake lights and taillights.
How should you enter a vehicle from the street side?
When entering a vehicle from the street side, :
- check for traffic to the right.
- approach from the front of the vehicle.
- hold the door open to protect yourself.
- approach from the back of the vehicle.
How should you approach a vehicle from the curb?
When approaching your vehicle parked at a curb, you should: Approach the drivers door from the front of your vehicle, facing oncoming traffic.
When pulling away from a curb the driver should first?
When pulling away from the curb, you should: Check your rear-view mirror, then pull out when safe. Shoulder check, and then pull out when safe. Check over your shoulder, then signal and wait.
What is the most important step in turning the car around?
whats the most important step in turning the car around? Carefully check traffic in all directions.
Why is it important to look under and around your car before getting in?
Why is it good habit to look under, around, and inside the vehicle before you open the door? If you look under, you may be able to detect a potential problem by looking for water or oil marks under the vehicle. If you look around, you can avoid injuring someone or damaging your vehicle.
What to check before starting to drive?
10 things To Check Before Starting Your Car
- Nothing is obstructing your car. Make sure there are no stones near the tyres or another car blocking your way.
- Check the tyres.
- Check all fluid levels.
- Clean all the glass area.
- Adjust the rear view mirrors.
- Adjust your seat.
- Fasten your seatbelt.
- Check all the warning lights.
Which capability is most important to driving?
Study for Driving from the Ch. 1 Test A sheet
| Question | Answer |
|---|---|
| Which capability is most important to safe driving? a. operating the vehicle’s controls b. good hearing c. decision-making d. sense of feel | c. decision-making |
| Which IPDE step do you use when you look ahead and locate a hazard? | identify |
What is the greatest problem most beginning drivers face?
Study for Driving from the Ch. 1 Test B sheet
| Question | Answer |
|---|---|
| Driving is a social task because | drivers must interact with each other |
| The greatest problem most beginning drivers face is their | inability to make decisions |
| What IPDE step do you use when you apply the brakes to stop? | execute |
Where do you look when driving straight?
To steer straight ahead, look about 12 seconds directly ahead of where you are sitting. To steer around a curve, look at the inside of the curve to where the centre lines vanish. Do not look in the mirrors, do not look down at your instrument panel.
What are low risk driving basic tools?
Good searching habits and the ability to manage space on the roadway are two basic tools for-low risk driving. All activities throughout a person’s life involve some degree of risk. Risk factors can be contributed by the driver, by the vehicle, by the roadway and environment.
What is a low risk driver?
The low risk driver is defined as a driver who identifies real and/or potential hazards, and reduces the risk of these hazards by adjusting speed and/or position and communicates to others his/her intentions.
What is a high-risk driver?
A high-risk driver is someone who is much more likely to file an insurance claim than the average driver. Some of the most common attributes of high-risk drivers are a history of car accidents, multiple tickets and citations, bad credit, and a conviction for a serious offense like DUI.
How many hours should you drive with your road teacher?
40 hours
What is the main risk in driving?
Driving when you had a drink or two, or when you are under the influence of drugs or alcohol. Driving while you are distracted (e.g., while you are texting or using your cell phone). Driving when you are fatigued. Driving too fast when the roads are slippery or when weather is bad, such as in fog, rain, snow.
What are three dangerous times to be driving?
The NHTSA reports that most accidents occur during “rush hour,” between 3 p.m. and 6 p.m. And according to the NHTSA, Saturday is the most dangerous day of the week to drive, primarily because there are more cars – and more drunk drivers – on the road than any other day.
What is the definition of risk in driving?
There are always risks involved in driving a vehicle. Some factors that can contribute to the degree of driving risk include the ability of the driver and the condition of the vehicle. Other risks are caused by the environment (such as the weather) or the condition of the highway.
What are three factors that increase risk while driving?
What are three major factors that can contribute to the degree of risk you encounter while driving? The three factors contributing to the degrees of risk while driving are the driver, the vehicle, and the roadway and the environment.
What are the 3 most important actions you can take to avoid conflict?
List the three actions you can execute to avoid conflict and explain how these actions help you prevent conflicts. The three important actions to execute are controlling sped, steering, and communication.
What three steps can you take to check traction while driving?
How can traction control your vehicle?…
- Adjust your seat to a comfortable position.
- Snap the metal fitting on the end of belt into the buckle.
- Adjust the shoulder part of safety belt across your chest.
What are the 4 steps of the IPDE process?
The four steps of the IPDE process are:
- I—Identify—Locate potential hazards within the driving scene.
- P—Predict—Judge where the possible points of conflict may occur.
- D—Decide—Determine what action to take, when, and where to take it.
- E—Execute—Act by maneuvering the car to avoid conflicts.
What two factors can make city driving difficult?
Terms in this set (16) What two factors make city driving difficult? Traffic is denser and there are more hazards. When following a vehilce look where?
What are the steps for the Smith System?
The Smith System is based on using five rules when operating a motor vehicle and aim to provide space, visibility and time to reduce the chance of a major accidents….How to Master the 5 Principles of Smith System Driving
- Aim High.
- The Big Picture.
- Keep Your Eyes Moving.
- Leave Yourself an Out.
- Make Sure They See You.
How many seconds should you be looking down the road?
15 seconds
What is the minimum distance you should look ahead while driving?
12 to 15 seconds
When you should you check your blind spot?
Anytime you’re changing lanes or merging, you’ll want to check for any car blind spots in your driver view first. Flip on your turn signal to let other cars know you’ll be moving over, and check your rear mirrors and side car mirrors. Finally, you’ll want to do a quick shoulder check one last time.