How will you adjust the injection timing of the injection pump?

How will you adjust the injection timing of the injection pump?

If you decide to alter the fuel injection pump, you’ll need to:

1. Use a socket wrench on the front camshaft bolt to hand-turn the engine clockwise until the first cylinder is at TDC.
2. Both the intake and exhaust valves should be closed, and the TDC mark should be aligned.

How do you adjust the timing on a fuel pump?

Adjustment of Fuel Pump Timing

1. By adding or reduction shims on the pump base, or.
2. By turning the plunger up and down adjustment screw on the pump roller guide, or.
3. By shifting the coupling flange between the pump and the drive side of the engine in case of combined unit system, (for small engine)

How can I get more power out of my 6.5 turbo diesel?

Here are the top ways to get more out of your engine.

1. Upgrade the Air Intake. One sure way to increase the performance of a diesel vehicle is to improve the airflow to the engine.
2. Change or Reprogram the ECM.
3. Using New Fuel Injectors.
4. Turbochargers.
5. Performance Exhaust.

How do you bleed a fuel system on a 6.5 Diesel?

Place the opposite end of the hose in a fuel safe container. If the engine will run, start the engine and bleed any remaining air from the system by slightly opening the T-handle bleed valve until a steady stream of fuel flows out of the hose. Close the valve once this is achieved.

How do you test a diesel lift pump?

To diagnose lift pump performance, click the ignition key to the start function quickly, so the engine doesn’t start, and let go, leaving the key in the run position (the lift pump should run 25 seconds).

Does a diesel lift pump run all the time?

Lift pump run time is controled by the ECM. It runs for a predetermined time (approx 1 sec. on my truck) then shuts off. When you ‘bump’ the starter without starting, the ECM will let the pump run 15-30sec.