How will you explain the operation of a simple electric motor?

How will you explain the operation of a simple electric motor?

This simple electric motor works by the magnetic force F = IL x B. The current goes around the coil so that it points one direction in one end of the loop and in the other direction at the other end of the loop. The magnetic field at both of these spots points in the same direction.

What is the operation of a simple electric motor and generator?

When an electrical current is applied to the motor, the magnets or windings create a magnetic field that both attracts and repels the rotor, causing it to spin. The spinning motion of the rotor drives the shaft that it is mounted on, which in turn can deliver the mechanical power wherever it is needed.

What is the working principle of single phase motor?

Single phase motors work on the same principle as 3 phase motors except they are only run off one phase. A single phase sets up an oscillating magnetic field that goes back and forth rather than a rotating magnetic field (see bottom figure). Because of this a true single phase motor has zero starting torque.

What does a capacitor do on a single phase motor?

Some single-phase AC electric motors require a “run capacitor” to energize the second-phase winding (auxiliary coil) to create a rotating magnetic field while the motor is running. Start capacitors briefly increase motor starting torque and allow a motor to be cycled on and off rapidly.

Which capacitor is used in single phase motor?

Run capacitors are mostly polypropylene film capacitors (historically: metallised paper capacitors) and are energized the entire time the motor is running. Run capacitors are rated in a range of 1.5 to 100 µF, with voltage classifications of 250, 370 and 440 V.

How do you size a capacitor for a motor?

Multiply 0.5 times the square of the voltage. Call this result “x.”. Continuing the example, you have 0.5 times 11.5 volts times 11.5 volts, or 66.1 square volts for “x”. Divide the start-up energy requirement, in joules, of the motor by “x” to arrive at the capacitor size needed in farads.